Choice of time_scheme - How to modify the parameters?
Posted: Sun Oct 18, 2020 3:51 pm
Dear code saturne team,
Bonjour!
I got below message while performing LES case of tutorial "Code Saturne version 6.0 tutorial:
Turbulence simulation in a mixing tee". I really want to know how to fix this problem.
I have tried with modini.f90 and subroutine usipsu in cs_user_parameter.f90.
But I could only change the value of isto2t .
@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ @@ WARNING : WHEN READING INPUT DATA
@ =========
@ CHOICE OF TIME-SCHEME
@
@ TIME-SCHEME FOR VELOCITY IS SECOND ORDER
@ (THETAV = 0.50E+00)
@ SOME TERMS ARE HOWEVER FIRST ORDER IN TIME WITH
@ THE FOLLOWING SETTINGS:
@
@ parameters ISTMPF ISNO2T ISTO2T IROEXT IVIEXT ICPEXT
@ Values entered 2 1 0 0 0 0
@
@ computation will go on.
@
@ Check the input data given through the User Interface
@ or in cs_user_parameters.f90.
Thank you in advance very much for your attention and your help!
Je vous remercie
Bonjour!
I got below message while performing LES case of tutorial "Code Saturne version 6.0 tutorial:
Turbulence simulation in a mixing tee". I really want to know how to fix this problem.
I have tried with modini.f90 and subroutine usipsu in cs_user_parameter.f90.
But I could only change the value of isto2t .
@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ @@ WARNING : WHEN READING INPUT DATA
@ =========
@ CHOICE OF TIME-SCHEME
@
@ TIME-SCHEME FOR VELOCITY IS SECOND ORDER
@ (THETAV = 0.50E+00)
@ SOME TERMS ARE HOWEVER FIRST ORDER IN TIME WITH
@ THE FOLLOWING SETTINGS:
@
@ parameters ISTMPF ISNO2T ISTO2T IROEXT IVIEXT ICPEXT
@ Values entered 2 1 0 0 0 0
@
@ computation will go on.
@
@ Check the input data given through the User Interface
@ or in cs_user_parameters.f90.
Thank you in advance very much for your attention and your help!
Je vous remercie