Check Mesh Problem
Posted: Thu Dec 29, 2011 6:06 pm
I've been installed Code Saturne 2.1.2.
Everything ran fine, but when I tried to check my mesh, this error appeared:
p, li { white-space: pre-wrap; }
/home/renanneves/Bureau/code_saturne-2.1.2/code_saturne-2.1.2/libexec/code_saturne/cs_solver was built without XML support,
so parameter file "cs_cmd" may not be loaded.
Pile d'appels :
1: 0x7fe504a60f40 <cs_opts_define+0x510> (libsaturne.so.0)
2: 0x7fe504a2d7a0 <main+0xa0> (libsaturne.so.0)
3: 0x7fe500f13c4d <__libc_start_main+0xfd> (libc.so.6)
4: 0x40a3f9 <> (cs_solver)
Fin de la pile
What do I need to do?
Regards,
Everything ran fine, but when I tried to check my mesh, this error appeared:
p, li { white-space: pre-wrap; }
/home/renanneves/Bureau/code_saturne-2.1.2/code_saturne-2.1.2/libexec/code_saturne/cs_solver was built without XML support,
so parameter file "cs_cmd" may not be loaded.
Pile d'appels :
1: 0x7fe504a60f40 <cs_opts_define+0x510> (libsaturne.so.0)
2: 0x7fe504a2d7a0 <main+0xa0> (libsaturne.so.0)
3: 0x7fe500f13c4d <__libc_start_main+0xfd> (libc.so.6)
4: 0x40a3f9 <> (cs_solver)
Fin de la pile
What do I need to do?
Regards,