Page 1 of 1
singularity Salome_Meca CFD extension install
Posted: Sun Oct 15, 2023 7:50 pm
by olav2
Hello,
what is the correct way to use the CFD extension for salome meca 2022 with singularity on debian11 ?
thank you!
Re: singularity Salome_Meca CFD extension install
Posted: Sun Oct 15, 2023 8:46 pm
by Yvan Fournier
Hello,
I am no familiar with salome_meca 2022. From discussions with code_aster developpers and you post, I understand it is built using Singularity ?
Depending on whether the Singularity container includes all the tools needed for configuration, compilation and build (see code_saturne install guide for prerequisites and recommended packages), you may be able to simply follow the regular build procedure from the container or need a more advanced setup procedure.
This is not something we have tried/tested so far (the work on code_saturne/code_saturne coupling has been tested on cluster install, native at least on the code_saturne side).
Other people who have more knowledge concerning the salome_meca container are welcome to contribute to this thread...
Best regards,
Yvan