Syrthes CFD installation
-
- Posts: 4153
- Joined: Mon Feb 20, 2012 3:25 pm
Re: Syrthes CFD installation
Hello,
According to the last log, there is an error building some Syrthes tools (which are independent of code_saturne), but there is not much detail.
This is surprising, as the firs function which fails (Syrthes/EnSight conversion) should have minimal external library dependencies. Do you have any additional error essages in the terminal from which you ran the Syrthes install ?
Regards,
Yvan
According to the last log, there is an error building some Syrthes tools (which are independent of code_saturne), but there is not much detail.
This is surprising, as the firs function which fails (Syrthes/EnSight conversion) should have minimal external library dependencies. Do you have any additional error essages in the terminal from which you ran the Syrthes install ?
Regards,
Yvan
-
- Posts: 10
- Joined: Mon Oct 05, 2020 4:42 pm
Re: Syrthes CFD installation
Hello,
Indeed, there are some errors (I logged terminal errors in the syrthes_install.log file).
Best regards,
Vincent
Indeed, there are some errors (I logged terminal errors in the syrthes_install.log file).
Best regards,
Vincent
- Attachments
-
- ERREUR.log
- (2.05 KiB) Downloaded 851 times
-
- syrthes_install.log
- (84.16 KiB) Downloaded 837 times
-
- setup.ini
- (4.42 KiB) Downloaded 805 times
Vincent Doré
-
- Posts: 4153
- Joined: Mon Feb 20, 2012 3:25 pm
Re: Syrthes CFD installation
Hello,
It seems mpicc is not found, so you may have a configuration error (in incorrect mpicc path in setup.ini), or are missing an MPI installation.
Regards,
Yvan
It seems mpicc is not found, so you may have a configuration error (in incorrect mpicc path in setup.ini), or are missing an MPI installation.
Regards,
Yvan
-
- Posts: 10
- Joined: Mon Oct 05, 2020 4:42 pm
Re: Syrthes CFD installation
Sorry Yvan, I made a change and forgot to redefine path to mpicc after.
Here is the error with the mpicc path filled.
Vincent
Here is the error with the mpicc path filled.
Vincent
- Attachments
-
- ERREUR.log
- (788 Bytes) Downloaded 788 times
-
- syrthes_install.log
- (146.13 KiB) Downloaded 799 times
-
- setup.ini
- (4.49 KiB) Downloaded 842 times
Vincent Doré
-
- Posts: 4153
- Joined: Mon Feb 20, 2012 3:25 pm
Re: Syrthes CFD installation
Hello,
Is the installation more complete now ?
Regards,
Yvan
Is the installation more complete now ?
Regards,
Yvan
-
- Posts: 10
- Joined: Mon Oct 05, 2020 4:42 pm
Re: Syrthes CFD installation
Hello,
The installation is more complete.
Code Saturne works alone.
Syrthes works alone.
When my user tried to make a coupled simulation, the directory creation works, GUI interface also but we have an error when we launch runcase (see picture attached).
Best regards,
Vincent
The installation is more complete.
Code Saturne works alone.
Syrthes works alone.
When my user tried to make a coupled simulation, the directory creation works, GUI interface also but we have an error when we launch runcase (see picture attached).
Best regards,
Vincent
Vincent Doré
-
- Posts: 4153
- Joined: Mon Feb 20, 2012 3:25 pm
Re: Syrthes CFD installation
Hello,
Was code_saturne and PLE installed with MPI support ? This is necessary for the Syrthes coupling.
Regards,
Yvan
Was code_saturne and PLE installed with MPI support ? This is necessary for the Syrthes coupling.
Regards,
Yvan
-
- Posts: 10
- Joined: Mon Oct 05, 2020 4:42 pm
Re: Syrthes CFD installation
Hello,
Indeed, there were a bad path in one of the config file.
Now the previous problem is solved.
Syrthes simulations work for mono or multi procs.
Saturne simulations work for mono or multi procs.
But coupled simulation doesn't work.
Any idea why we face this cs_syr_coupling.c:898: Erreur fatale ?
Thanks,
Vincent
Indeed, there were a bad path in one of the config file.
Now the previous problem is solved.
Syrthes simulations work for mono or multi procs.
Saturne simulations work for mono or multi procs.
But coupled simulation doesn't work.
Any idea why we face this cs_syr_coupling.c:898: Erreur fatale ?
Thanks,
Vincent
- Attachments
-
- run_solver.log
- (10.09 KiB) Downloaded 858 times
-
- error.txt
- (584 Bytes) Downloaded 829 times
-
- coupling_parameters.py
- (257 Bytes) Downloaded 817 times
Vincent Doré
-
- Posts: 4153
- Joined: Mon Feb 20, 2012 3:25 pm
Re: Syrthes CFD installation
Hello,
Could you post the top-level "run_solver" generated in RESU_COUPLING/run_id ?
Does the libsyrthes_cfd.a library exist in the Syrthes installation "lib" directory (next to libsyrthes_seq.a and libsyrthes_mpi.a) ?
Best regards,
Yvan
Could you post the top-level "run_solver" generated in RESU_COUPLING/run_id ?
Does the libsyrthes_cfd.a library exist in the Syrthes installation "lib" directory (next to libsyrthes_seq.a and libsyrthes_mpi.a) ?
Best regards,
Yvan
-
- Posts: 10
- Joined: Mon Oct 05, 2020 4:42 pm
Re: Syrthes CFD installation
Hello,
Here are info requested.
Thanks again.
Vincent
Here are info requested.
Thanks again.
Vincent
- Attachments
-
- syrthes-lib-dir-content.txt
- (336 Bytes) Downloaded 795 times
-
- run_solver.txt
- (456 Bytes) Downloaded 838 times
Vincent Doré