code_saturne User's Forum

Posted: **Mon Jul 04, 2016 3:29 pm**

How do I run debugger with syrthes?
Why syrthes sees "Group_Of_All_Faces_interface_tube_eau" as a group of volumes?
I defined it as group of faces in salome.

can you make a working case with what i sent?

Thanks

Posted: **Tue Jul 05, 2016 12:05 pm**

Hello,

No, Syrthes can only handle triangles and tetrahedra, so for your groups to be readable, you have to split the pyramids and quadrangles into tetrahedra and triangles (or split quadrangles first, then mesh the volume).

Regards,

Yvan

Posted: **Tue Jul 05, 2016 3:40 pm**

great !
i changed the meshing from square to triangle and tetrahedrons and it works!

Thanks a lot

Posted: **Sun Jul 10, 2016 9:36 pm**

Hi

I have another problem with my complete case. When i running the calculation I have this error message in the listing file for Flue side:

Code: Select all

cs_post.c:3824: Erreur fatale.

Le maillage de post-traitement -4 a été associé
au gestionnaire de post-traitement -1, qui permet
des maillages dépendant du temps, donc il ne peut
pas être libéré.



Pile d'appels :
   1: 0x7f8cbb8ad5ec <cs_post_free_mesh+0x12c>        (libsaturne.so.0)
   2: 0x7f8cbb8d6649 <+0x125649>                      (libsaturne.so.0)
   3: 0x7f8cbb8d7613 <cs_syr4_coupling_init_mesh+0x63> (libsaturne.so.0)
   4: 0x7f8cbb8d90da <geosyr_+0x2a>                   (libsaturne.so.0)
   5: 0x7f8cbb863b32 <cregeo_+0x24>                   (libsaturne.so.0)
   6: 0x7f8cbb82cf1f <caltri_+0x14d>                  (libsaturne.so.0)
   7: 0x7f8cbb806d6a <cs_run+0x46a>                   (libsaturne.so.0)
   8: 0x7f8cbb8067b5 <main+0x125>                     (libsaturne.so.0)
   9: 0x7f8cbb1eb830 <__libc_start_main+0xf0>         (libc.so.6)
  10: 0x400759     <_start+0x29>                    (cs_solver)
Fin de la pile

with the water side I have this

Code: Select all

 Lecture du fichier :  mesh_input
 Fin de la lecture :  mesh_input
 Pas de fichier "partition_input/domain_number_4" disponible;

 ----------------------------------------------------------

 Partitionnement par courbe fractale : Morton (dans boîte englobante).
Signal SIGTERM (terminaison) reçu.
--> calcul interrompu par l'environnement.

Pile d'appels :
   1: 0x7f8bcfa6e4d5 <+0x1f54d5>                      (libsaturne.so.0)
   2: 0x7f8bcfa71548 <cs_order_gnum+0x48>             (libsaturne.so.0)
   3: 0x7f8bcfa48596 <+0x1cf596>                      (libsaturne.so.0)
   4: 0x7f8bcfa4af94 <cs_block_to_part_create_adj+0x704> (libsaturne.so.0)
   5: 0x7f8bcfc14b9a <cs_partition+0xf1a>             (libsaturne.so.0)
   6: 0x7f8bcf985175 <cs_preprocessor_data_read_mesh+0x2c5> (libsaturne.so.0)
   7: 0x7f8bcf97e447 <cs_preprocess_mesh+0x157>       (libsaturne.so.0)
   8: 0x7f8bcf8cea25 <cs_run+0x125>                   (libsaturne.so.0)
   9: 0x7f8bcf8ce7b5 <main+0x125>                     (libsaturne.so.0)
  10: 0x7f8bcf2b3830 <__libc_start_main+0xf0>         (libc.so.6)
  11: 0x400759     <_start+0x29>                    (cs_solver)
Fin de la pile

I don't understand where the issue come from. i don't have a time dependent mesh.
All cases are working fine separately.

Regards

Posted: **Sun Jul 10, 2016 11:12 pm**

Hello,

Could you check your postprocessing output settings relative to this ?

Regards,

Yvan

Posted: **Tue Jul 12, 2016 10:00 am**

Hi,

yes a parameter was wrong in output control. now it's working fine, finaly.

Thank you

code_saturne User's Forum

coupling with syrthes failure

Re: coupling with syrthes failure

Re: coupling with syrthes failure

Re: coupling with syrthes failure

Re: coupling with syrthes failure

Re: coupling with syrthes failure

Re: coupling with syrthes failure