Hello,
While reviewing results on the boundaries of my mesh, there is a "dimensionless_heat_flux" component. I could not find what its definition was in the documentation. Can anyone enlighten me?
Best regards
Dimensionless heat flux
Forum rules
Please read the forum usage recommendations before posting.
Please read the forum usage recommendations before posting.
-
Yvan Fournier
- Posts: 4100
- Joined: Mon Feb 20, 2012 3:25 pm
Re: Dimensionless heat flux
Hello,
If I remember correctly, this is an attempt at the estimation of the Nusselt Number. But contrary to the "real" Nusselt number which is based on a bulk temperature in a zone which needs to be chosen, this uses the near wall temperature (i.e. the temperare in the cell adjacent to a boundary face) as the bulk. So it may be sensitive to mesh refinement in the near wall region...
Best regards,
Yvan
If I remember correctly, this is an attempt at the estimation of the Nusselt Number. But contrary to the "real" Nusselt number which is based on a bulk temperature in a zone which needs to be chosen, this uses the near wall temperature (i.e. the temperare in the cell adjacent to a boundary face) as the bulk. So it may be sensitive to mesh refinement in the near wall region...
Best regards,
Yvan