Choice of time_scheme - How to modify the parameters?

Questions and remarks about code_saturne usage
Forum rules
Please read the forum usage recommendations before posting.
Post Reply
Gen
Posts: 17
Joined: Sat Sep 05, 2020 7:39 am

Choice of time_scheme - How to modify the parameters?

Post by Gen »

Dear code saturne team,

Bonjour!

I got below message while performing LES case of tutorial "Code Saturne version 6.0 tutorial:
Turbulence simulation in a mixing tee". I really want to know how to fix this problem.
I have tried with modini.f90 and subroutine usipsu in cs_user_parameter.f90.
But I could only change the value of isto2t :(.



@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ @@ WARNING : WHEN READING INPUT DATA
@ =========
@ CHOICE OF TIME-SCHEME
@
@ TIME-SCHEME FOR VELOCITY IS SECOND ORDER
@ (THETAV = 0.50E+00)
@ SOME TERMS ARE HOWEVER FIRST ORDER IN TIME WITH
@ THE FOLLOWING SETTINGS:
@
@ parameters ISTMPF ISNO2T ISTO2T IROEXT IVIEXT ICPEXT
@ Values entered 2 1 0 0 0 0
@
@ computation will go on.
@
@ Check the input data given through the User Interface
@ or in cs_user_parameters.f90.


Thank you in advance very much for your attention and your help!
Je vous remercie :)
Yvan Fournier
Posts: 4070
Joined: Mon Feb 20, 2012 3:25 pm

Re: Choice of time_scheme - How to modify the parameters?

Post by Yvan Fournier »

Hello,

Did you modify some parameters ? Is this an error or just a warning message (i.e. does the code stop or keep running after this message; it seems to indicate it keeps running) ?

Best regards,

Yvan
Gen
Posts: 17
Joined: Sat Sep 05, 2020 7:39 am

Re: Choice of time_scheme - How to modify the parameters?

Post by Gen »

Hello,
Sorry for replying too late. It's just a warning message and it keeps running.
I followed the tutorial step by step so I suppose I didn't modify any parameters.

When I calculated other LES case by myself, I also got this message. I guess it’s because some parameters are not set correctly, though I haven't figured out how to solve it.

Thanks for your help!
Post Reply