Wind - Building interaction

Miscellaneous discussion topics about Code_Saturne (development, ...)
Post Reply
giannitu
Posts: 8
Joined: Mon Jul 06, 2015 4:29 pm

Wind - Building interaction

Post by giannitu »

Hi, I'm beginning to use again Code Saturne, and I need some information, if possible:
How can I simulate the Boundary Layer behavior of the atmosfere in the wind - building interaction for civil construction?
are there some tutorials for such e simulation?
thanks in advance.
Yvan Fournier
Posts: 4070
Joined: Mon Feb 20, 2012 3:25 pm

Re: Wind - Building interaction

Post by Yvan Fournier »

Hello,

I am not aware of any such specific tutorials for this type of application.

I'll check with the people working on atmospheric modeling to see if they have any suggestions.

What type of information do you need ? Stresses on wall surfaces are a standard output option of the code.

Regards,

Yvan
giannitu
Posts: 8
Joined: Mon Jul 06, 2015 4:29 pm

Re: Wind - Building interaction

Post by giannitu »

Goodmorning Yvan,
I'd like to simulate the real boundary layer behavior.
The wind speed is slower near the ground and I'd like to know how to simulate such a behavior.
thanks in advance.

Gianni
Yvan Fournier
Posts: 4070
Joined: Mon Feb 20, 2012 3:25 pm

Re: Wind - Building interaction

Post by Yvan Fournier »

Hello,

Usually, for this type fo simulation, and given the "reasonable" resolutions used, "rough wall" boundary conditons are used for this.

Regards,

Yvan
giannitu
Posts: 8
Joined: Mon Jul 06, 2015 4:29 pm

Re: Wind - Building interaction

Post by giannitu »

Thanks for your kind reply.
I'll try it.
best regards
Post Reply