hello
i have to run a simulation using the Lagrangian in code saturne version 2.0.2.
but i have this error that i don't understand:
===============================================================
CALCULATION PREPARATION
=======================
===========================================================
Lecture du fichier : preprocessor_output
@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ @@ WARNING: STOP WHILE READING INPUT DATA
@ =========
@ PARALLEL COMPUTING AND LAGRANGIAN PARTICULE TRANSPORT
@ OR NOT COMPATIBLE IN THE CURRENT VERSION
@
@ The calculation could NOT run.
@
@ The present CPU has rank 0
@ Flag IILAGR had value 3
@ in uslag1 ( lagrangien module is active for IILAGR>0).
@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@
@
@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ @@ WARNING: ABORT IN THE DATA SPECIFICATION
@ ========
@ THE CALCULATION PARAMETERS ARE INCOHERENT OR INCOMPLET
@
@ The calculation will not be run ( 1 errors).
@
@ See previous impressions for more informations.
@ Verify the provided data in the interface, usini1 or
@ the other initialization subroutines.
@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
Pile d'appels :
1: 0x7f04d3de1118 <initi1_+0x124> (libsaturne.so.0)
2: 0x7f04d3c68248 <cs_run+0xa8> (libsaturne.so.0)
3: 0x7f04d3c68cc5 <main+0x1f5> (libsaturne.so.0)
4: 0x7f04d0407c4d <__libc_start_main+0xfd> (libc.so.6)
5: 0x40a359 <> (cs_solver)
Fin de la pile
can you please tell me wha is wrong
problem using lagrangian module with code saturne 2.0.2
Forum rules
Please read the forum usage recommendations before posting.
Please read the forum usage recommendations before posting.
-
- Posts: 118
- Joined: Mon Feb 20, 2012 2:07 pm
Re: problem using lagrangian module with code saturne 2.0.2
Probably a mistake in error message.
Replace "OR" by "ARE" and the error message should be clear.
By the way, this topic should not be in installation issue but in Code_Saturne usage.
Regards,
Replace "OR" by "ARE" and the error message should be clear.
By the way, this topic should not be in installation issue but in Code_Saturne usage.
Regards,
Re: problem using lagrangian module with code saturne 2.0.2
Sorry i was not paying attention.
Thanks you for help, i am trying to install tne version 3.3.2 but that is not working.
Best regards
Thanks you for help, i am trying to install tne version 3.3.2 but that is not working.
Best regards