1D-wall thermal module

Questions and remarks about code_saturne usage
Forum rules
Please read the forum usage recommendations before posting.
Post Reply
Rodolphe
Posts: 18
Joined: Sun Mar 14, 2021 12:59 pm

1D-wall thermal module

Post by Rodolphe »

Hi,

Since I have some issues with Syrthès installation, I want to use the 1D-wall thermal module (cs_user_1d_wall_thermal.c)in CS as first approximation. So I was wondering if there are any tutorials or examples related to the use of the subroutine cs_user_1d_wall_thermal.c. Until now, I'm using the example on the programmer's documentation but I'm a bit lost.

https://www.code-saturne.org/cms/sites/ ... _pt1d.html

If I'm not wrong, it is not possible to use this model with the GUI ?

I work with the last production version of CS : 6.0.6
I'm on Ubuntu 20.04.2 LTS

Thanks a lot for your help !

Rodolphe
Yvan Fournier
Posts: 4069
Joined: Mon Feb 20, 2012 3:25 pm

Re: 1D-wall thermal module

Post by Yvan Fournier »

Hello,

No, the example you are using is the best we have. Actually, I do not encourage using that model, except in cases where you are sure the transverse heat conduction effects can be ignored, and a better approach is to use an extrusion of the boundary (or in more complex cases, a conforming joining with a solid area mesh) and then switch to internal coupling. This still requires user-defined functions in v6.0, but is available using the GUI in v7., which is currently undergoing validation (over 2/3 done) and for which I expect to provide a first release candidate in 2 to 3 weeks.

Best regards,

Yvan
Post Reply