Dear CS developpers,
I am migrating from version 3.0 to version 6 and I tried to recreate a case using the atmospheric module with the RANS model and adding a scalar. The results for the flow seem to be coherent between the two versions, however, there is an issue with the initialisation of the scalar field in the version 6.1-alpha. I have attached an image of the start of the simulation (t=0) where you can see a "block" of cells that contains a mass but in my setup file I have set the initial value to 0 for all cells.
Unfortunately I currently cannot pull the latest version from Git because I do not have enough administrator rights in the server (IT representative currently on holidays), but I would like to discard the possibility of a mistake in the setup.xml, the cs_user_mass_source_terms.f90 , or maybe you have already adressed this issue in the latest developments. I have attached the mentioned files as well as the listing output in the compressed file.
Thank you for your support,
Marcia
Problem with scalar initialisation CSv6 alpha
Forum rules
Please read the forum usage recommendations before posting.
Please read the forum usage recommendations before posting.
Problem with scalar initialisation CSv6 alpha
- Attachments
-
- testsc1.rar
- (41.41 KiB) Downloaded 146 times
Re: Problem with scalar initialisation CSv6 alpha
I found my problem! I had the cs_user_initialization routine activated in my SRC which contained an additional scalar field initialisation value. Sorry for the post,
Marcia
Marcia