Syrthes CFD installation

This forum is dedicated to Syrthes related issues, as the Syrthes tool does not have its own forum.
Yvan Fournier
Posts: 4070
Joined: Mon Feb 20, 2012 3:25 pm

Re: Syrthes CFD installation

Post by Yvan Fournier »

Hello,

According to the last log, there is an error building some Syrthes tools (which are independent of code_saturne), but there is not much detail.

This is surprising, as the firs function which fails (Syrthes/EnSight conversion) should have minimal external library dependencies. Do you have any additional error essages in the terminal from which you ran the Syrthes install ?

Regards,

Yvan
Vincent_DORE
Posts: 10
Joined: Mon Oct 05, 2020 4:42 pm

Re: Syrthes CFD installation

Post by Vincent_DORE »

Hello,

Indeed, there are some errors (I logged terminal errors in the syrthes_install.log file).

Best regards,

Vincent
Attachments
ERREUR.log
(2.05 KiB) Downloaded 216 times
syrthes_install.log
(84.16 KiB) Downloaded 200 times
setup.ini
(4.42 KiB) Downloaded 209 times
Vincent Doré
Yvan Fournier
Posts: 4070
Joined: Mon Feb 20, 2012 3:25 pm

Re: Syrthes CFD installation

Post by Yvan Fournier »

Hello,

It seems mpicc is not found, so you may have a configuration error (in incorrect mpicc path in setup.ini), or are missing an MPI installation.

Regards,

Yvan
Vincent_DORE
Posts: 10
Joined: Mon Oct 05, 2020 4:42 pm

Re: Syrthes CFD installation

Post by Vincent_DORE »

Sorry Yvan, I made a change and forgot to redefine path to mpicc after.
Here is the error with the mpicc path filled.

Vincent
Attachments
ERREUR.log
(788 Bytes) Downloaded 201 times
syrthes_install.log
(146.13 KiB) Downloaded 216 times
setup.ini
(4.49 KiB) Downloaded 219 times
Vincent Doré
Yvan Fournier
Posts: 4070
Joined: Mon Feb 20, 2012 3:25 pm

Re: Syrthes CFD installation

Post by Yvan Fournier »

Hello,

Is the installation more complete now ?

Regards,

Yvan
Vincent_DORE
Posts: 10
Joined: Mon Oct 05, 2020 4:42 pm

Re: Syrthes CFD installation

Post by Vincent_DORE »

Hello,
The installation is more complete.
Code Saturne works alone.
Syrthes works alone.
When my user tried to make a coupled simulation, the directory creation works, GUI interface also but we have an error when we launch runcase (see picture attached).

Best regards,
Vincent
Attachments
error.png
Vincent Doré
Yvan Fournier
Posts: 4070
Joined: Mon Feb 20, 2012 3:25 pm

Re: Syrthes CFD installation

Post by Yvan Fournier »

Hello,

Was code_saturne and PLE installed with MPI support ? This is necessary for the Syrthes coupling.

Regards,

Yvan
Vincent_DORE
Posts: 10
Joined: Mon Oct 05, 2020 4:42 pm

Re: Syrthes CFD installation

Post by Vincent_DORE »

Hello,

Indeed, there were a bad path in one of the config file.
Now the previous problem is solved.

Syrthes simulations work for mono or multi procs.
Saturne simulations work for mono or multi procs.

But coupled simulation doesn't work.
Any idea why we face this cs_syr_coupling.c:898: Erreur fatale ?

Thanks,
Vincent
Attachments
run_solver.log
(10.09 KiB) Downloaded 222 times
error.txt
(584 Bytes) Downloaded 207 times
coupling_parameters.py
(257 Bytes) Downloaded 212 times
Vincent Doré
Yvan Fournier
Posts: 4070
Joined: Mon Feb 20, 2012 3:25 pm

Re: Syrthes CFD installation

Post by Yvan Fournier »

Hello,

Could you post the top-level "run_solver" generated in RESU_COUPLING/run_id ?

Does the libsyrthes_cfd.a library exist in the Syrthes installation "lib" directory (next to libsyrthes_seq.a and libsyrthes_mpi.a) ?

Best regards,

Yvan
Vincent_DORE
Posts: 10
Joined: Mon Oct 05, 2020 4:42 pm

Re: Syrthes CFD installation

Post by Vincent_DORE »

Hello,

Here are info requested.

Thanks again.
Vincent
Attachments
syrthes-lib-dir-content.txt
(336 Bytes) Downloaded 208 times
run_solver.txt
(456 Bytes) Downloaded 211 times
Vincent Doré
Post Reply