code_saturne User's Forum

Hello,

The second ldd should be:

ldd /home/julien/Code_Saturne/4.0.5/code_saturne-4.0.5/arch/Linux_x86_64/libexec/code_saturne/cs_solver.

Regards,

Yvan

Hello Yes, someone else on this forum has had a similar issue. I'm not sure of the solution for this, so I may need to ask the Syrthes team. When running in Parallel, Syrthes writes separate files for each MPI rank, which are then assembled by the script. In your case, do you have the separate inter...

Hello,

The setup files seem OK at first glance.

Could you post your fluid "listing" files, as well as the coupling_parameters.py file from the SCRIPTS directory ?

Regards,

Yvan

Hello, Yes, the main EDF website was reorganized, and finding R&D stuff is now a mess... Here is the current link to the training catalogue: https://www.edf.fr/sites/default/files/Lot%203/CHERCHEURS/HOMEPAGE/formations-rd-itech-2016-accessibles-aux-professionnels-exterieurs_en.pdf We do not have...

Hello, In this case, you should look for "balance" in the user examples in the Doxygen documentation. For visualization, you should be able to activate appropriate output from the "surface variables" options in the GUI (caution, the fluxes are for both convection and diffusion, s...

Hello, Unfortunately, I don't believe this is currently possible in Syrthes, but I have not looked into the Syrthes documentation recently. On the Code_Saturne side, we are working on a simplified solid model, so this may be possible within a few months, but is not possible yet to my knowledge... I'...

Hello,

I'm not sure about this (and not too familiar with that model), but try to look for "drift" in the documentation and examples, as this may be adapted to your needs. I'll also suggest a colleague who worked on drift to check your post.

Regards,

Yvan

Hello, Could you visualize the mesh quality criteria, and see if the strange spot correlates with that ? If you have a mesh quality issue, for a simple geometry, using a "ijk" type mesh in SALOME would help. If that is not possible, adding more sweeps in the Code_Saturne resolution might h...

Hello,

I mentioned your question to the colleague, but I'm not sure he has looked into it yet...

Regards,

Yvan

Hello,

OK, you can run "ldd syrthes" in solid, and for fluid, check the "cs_solver" path inside the run_solver file in the directory containing "fluid" and "solid", and run ldd on that path.

Regards,

Yvan