Search found 284 matches
- Thu Sep 05, 2019 9:06 am
- Forum: code_saturne usage
- Topic: Anisotropic thermal conductivity
- Replies: 4
- Views: 2499
Re: Anisotropic thermal conductivity
Hello Yvan, Thank you for the example. I have being running few very simple example and I have a pair of questions. For the case of the temperature field the "anisotropic_turbulent_viscosity" tensor "visten" should be filled with the thermal conductivity or the thermal conductivi...
- Wed Aug 28, 2019 8:05 am
- Forum: code_saturne usage
- Topic: Impose mesh displacement
- Replies: 15
- Views: 6929
Re: Impose mesh displacement
Hello,
Yes, we can report it in the git hub page of Code Saturne.
Regards,
Luciano
Yes, we can report it in the git hub page of Code Saturne.
Regards,
Luciano
- Tue Aug 27, 2019 12:18 pm
- Forum: code_saturne usage
- Topic: Impose mesh displacement
- Replies: 15
- Views: 6929
Re: Impose mesh displacement
Hello Djeen, You are right, if you set free inlet / outlet no option for ALE BC appears. When I tested your case I change the free inlet / outlet to one inlet and one outlet in order run a more "classical" problem, I found the problem in the mesh so I set sliding mesh for the inlet and out...
- Mon Aug 26, 2019 8:12 pm
- Forum: code_saturne usage
- Topic: Impose mesh displacement
- Replies: 15
- Views: 6929
Re: Impose mesh displacement
Hello, I have test your case and I think that the problem was the boundary conditions that you set for the mesh movement. You fixed the displacement at the inlet/outlet and this collapse the mesh. Mesh_dist.png If you set as sliding, the simulation run without problem. I have tested in my laptop wit...
- Tue Aug 20, 2019 8:31 pm
- Forum: code_saturne usage
- Topic: Impose mesh displacement
- Replies: 15
- Views: 6929
Re: Impose mesh displacement
<r>Hello Djeen,<br/> <br/> In your xml file (case) you set <I><s>[i]</s>fixed_displacements<e>[/i]</e></I> for two boundaries (upper and lower I guess), and <I><s>[i]</s>fixed_boundary <e>[/i]</e></I> for the rest. So, the boundary nodes con't move. You have to set <I><s>[i]</s>sliding boundary<e>[/...
- Sat Aug 17, 2019 12:07 am
- Forum: code_saturne usage
- Topic: Anisotropic thermal conductivity
- Replies: 4
- Views: 2499
Re: Anisotropic thermal conductivity
Hello Yvan,
Thanks for the example. The files inside the tar.gz seems to be symbolic links.
Could you check it.
Thank you very much.
Regards,
Luciano
Thanks for the example. The files inside the tar.gz seems to be symbolic links.
Could you check it.
Thank you very much.
Regards,
Luciano
- Fri Aug 16, 2019 2:31 pm
- Forum: code_saturne usage
- Topic: Anisotropic thermal conductivity
- Replies: 4
- Views: 2499
Anisotropic thermal conductivity
Hello, I'm solving a Conjugated Heat Transfer (CHT) problem using the internal coupling capability of CS modelling several solid parts. Some of this parts has anisotropic thermal conductivity. Is it possible to set this property? The only way that I found is through the idften tensor, but I'm no sur...
- Wed Aug 14, 2019 8:07 pm
- Forum: code_saturne usage
- Topic: Error with Catalyst postprocessing
- Replies: 8
- Views: 3926
Re: Error with Catalyst postprocessing
Hello Yvan,
One more question about Catalyst. It is possible to update the python script during the simulation, or once the simulation start the script is read only at the initialization of the writer?
Thanks.
Regards,
Luciano
One more question about Catalyst. It is possible to update the python script during the simulation, or once the simulation start the script is read only at the initialization of the writer?
Thanks.
Regards,
Luciano
- Wed Aug 14, 2019 1:11 pm
- Forum: code_saturne usage
- Topic: Restart problem
- Replies: 2
- Views: 1874
Re: Restart problem
Hello Yvan, Thanks for the info, I didn't know the bdump command. The mesh is not so big, 30M of cell. I'm using by default MPI-IO. listing: I/O read method: collective MPI-IO (explicit offsets) I/O write method: collective MPI-IO (explicit offsets) I/O rank step: 1 I attach the output after run the...
- Tue Aug 13, 2019 8:31 pm
- Forum: code_saturne usage
- Topic: Restart problem
- Replies: 2
- Views: 1874
Restart problem
Hello, I'm having problem to restart a simulation from a previous one. When I select the checkpoint directory I don't get the information about the last time step and physical time. When the new simulation is lauched the freeze after the read mesh process. The previous simulation finished correctly ...