Hello,
The auto_restart example is for a different use (updating the number of time steps for a restarted calculation, without otherwise changing the calculation options).
Did you check the GUI start/restart section ?
Regards,
Yvan
Search found 4082 matches
- Mon Dec 08, 2014 10:45 am
- Forum: code_saturne usage
- Topic: How to control the interval of checkpoint
- Replies: 8
- Views: 4189
- Fri Dec 05, 2014 3:26 pm
- Forum: code_saturne usage
- Topic: CS 4.0b - Output control strange behavior
- Replies: 8
- Views: 3684
Re: CS 4.0b - Output control strange behavior
Hello Pablo,
I'll probably be uploading a new 4.0 beta later today, with some fixes relative to combustion, so you may want to wait a bit before reinstalling...
Regards,
Yvan
I'll probably be uploading a new 4.0 beta later today, with some fixes relative to combustion, so you may want to wait a bit before reinstalling...
Regards,
Yvan
- Thu Dec 04, 2014 2:44 am
- Forum: code_saturne usage
- Topic: CS 4.0b - Output control strange behavior
- Replies: 8
- Views: 3684
Re: CS 4.0b - Output control strange behavior
Hello,
Im am not able to reproduce your bug: I built an xml file based on yours, on a simple cavity, adapting only the boundary conditions to my mesh, and obtained 40 time steps, not 20...
Do you have any user subroutines ?
Regards,
Yvan
Im am not able to reproduce your bug: I built an xml file based on yours, on a simple cavity, adapting only the boundary conditions to my mesh, and obtained 40 time steps, not 20...
Do you have any user subroutines ?
Regards,
Yvan
- Wed Dec 03, 2014 3:21 pm
- Forum: code_saturne usage
- Topic: CS 4.0b - Output control strange behavior
- Replies: 8
- Views: 3684
Re: CS 4.0b - Output control strange behavior
Hello,
Do you still have the issue with 200 time steps ? (maybe the problem was due to some partial update) ? If it still fails, could you post the listing for the case that fails ?
Regards,
Yvan
Do you still have the issue with 200 time steps ? (maybe the problem was due to some partial update) ? If it still fails, could you post the listing for the case that fails ?
Regards,
Yvan
- Wed Dec 03, 2014 1:45 pm
- Forum: code_saturne usage
- Topic: CS 4.0b - Output control strange behavior
- Replies: 8
- Views: 3684
Re: CS 4.0b - Output control strange behavior
Hello,
This is strange; I just ran a similar test on my side, and did not encounter this issue (I ran 40 steps for a steady calculation, output every 5 time steps, and obtained 8 output records).
Could you also post your listing file, as it has a summary of writer parameters. ?
Regards,
Yvan
This is strange; I just ran a similar test on my side, and did not encounter this issue (I ran 40 steps for a steady calculation, output every 5 time steps, and obtained 8 output records).
Could you also post your listing file, as it has a summary of writer parameters. ?
Regards,
Yvan
- Tue Dec 02, 2014 5:15 pm
- Forum: code_saturne usage
- Topic: Fatal error
- Replies: 5
- Views: 3600
Re: Fatal error
Hello, OK, thanks for the info. Did you use any user subroutines in your case ? A quick test on a virtual machine some time ago on my side seemed to fail, due to the Ubuntu packing mixing compile options from the 32 and 64 bit variants (the upstream Debian package does not have this issue, and the u...
- Tue Dec 02, 2014 5:12 pm
- Forum: code_saturne usage
- Topic: how to setup periodic temperature for an LES of a cuboid
- Replies: 14
- Views: 5966
Re: how to setup periodic temperature for an LES of a cuboid
Hello, As an example, I attach a cs_user_source_terms.f90 (for 4.0 beta) for Kawamura LES from our own test suite (unfortunately, we cannot publish the whole test suite, as some cases are confidential, and others may use data which we cannot redistribute). ustsnv si used for the velocity source term...
- Sat Nov 29, 2014 3:31 am
- Forum: code_saturne usage
- Topic: Pulverized coal and slagging TUTORIAL
- Replies: 30
- Views: 21607
Re: Troubles with Pulverized coal and slagging TUTORIAL
Hello, 1) Actually, this is an accumulation in stativ(iel,ildck), which accumulates tepa(npt,jrpoi)*tepa(npt,jrdck)*tepa(npt,jrdck) (statistical weight + shrinking diameter**2) at each time step. This is probably divided in lagsta for a final result. 2) I'll need to check. If you can't find "il...
- Sat Nov 29, 2014 3:14 am
- Forum: code_saturne usage
- Topic: Fatal error
- Replies: 5
- Views: 3600
Re: Fatal error
Hello, It seems your MPI IO is buggy on that machine. Your solution is correct. You could also configure Code_Saturne with the --disable-mpi-io option when installing it so you do not need to change the I/O option for each new computation. What Linux distribution and MPI library are you using ? Rega...
- Sat Nov 29, 2014 3:12 am
- Forum: code_saturne usage
- Topic: Compressible flow inlet not matching boundary conditions
- Replies: 10
- Views: 7704
Re: Compressible flow inlet not matching boundary conditions
Hello,
No one has had this issue before to my knowledge.
If you do not provide details as per the forum recommendations, and explain by how much your conditions differ from what you expect, it will be hard to say more.
Regards,
Yvan
No one has had this issue before to my knowledge.
If you do not provide details as per the forum recommendations, and explain by how much your conditions differ from what you expect, it will be hard to say more.
Regards,
Yvan