Hello,
Is your case small enough to post ? I see no obvious problem, so I would need to run the case to reproduce the issue.
Regards,
Yvan
Search found 4077 matches
- Mon Aug 29, 2016 4:23 pm
- Forum: code_saturne usage
- Topic: SIGSEGV signal (forbidden memory area access) intercepted!
- Replies: 1
- Views: 1850
- Tue Aug 23, 2016 3:01 pm
- Forum: code_saturne usage
- Topic: CS without graphic display
- Replies: 4
- Views: 3711
Re: CS without graphic display
Hello,
I would need to check the exact line matching the error message you have, but I won't be able to do it before next week.
Maybe someone else can look at this, or it will need to wait until next week.
Best regards,
Yvan
I would need to check the exact line matching the error message you have, but I won't be able to do it before next week.
Maybe someone else can look at this, or it will need to wait until next week.
Best regards,
Yvan
- Tue Aug 23, 2016 2:56 pm
- Forum: Installation issues
- Topic: medCoupling for saturne-aster coupling
- Replies: 11
- Views: 13117
Re: medCoupling for saturne-aster coupling
Hello,
Actually, the SALOME detection report for the install might be wrong, or you may have subtle environment aspects. When running configure, for --with-salome= you need to add the full path to your SALOME installation (not application).
Regards,
Yvan
Actually, the SALOME detection report for the install might be wrong, or you may have subtle environment aspects. When running configure, for --with-salome= you need to add the full path to your SALOME installation (not application).
Regards,
Yvan
- Mon Aug 22, 2016 3:02 pm
- Forum: Discussion
- Topic: CSR matrix format
- Replies: 11
- Views: 11827
Re: CSR matrix format
Hello,
You need to check the Doxygen user parameter examples.
Regards,
Yvan
You need to check the Doxygen user parameter examples.
Regards,
Yvan
- Mon Aug 22, 2016 2:18 pm
- Forum: Installation issues
- Topic: medCoupling for saturne-aster coupling
- Replies: 11
- Views: 13117
Re: medCoupling for saturne-aster coupling
Hello,
MEDCoupling is a specific module, which has changed a bit (so Code_Saturne 4.3 is compatible only with MEDCoupling 8), but you do not need it for the coupling which Code_Aster, which uses only an older subset of the Salome Kernel and YACS.
Regards,
Yvan
MEDCoupling is a specific module, which has changed a bit (so Code_Saturne 4.3 is compatible only with MEDCoupling 8), but you do not need it for the coupling which Code_Aster, which uses only an older subset of the Salome Kernel and YACS.
Regards,
Yvan
- Sun Aug 21, 2016 12:57 pm
- Forum: Syrthes related questions
- Topic: syrthes coupling on restart point
- Replies: 9
- Views: 8968
Re: syrthes coupling on restart point
Hello,
Not yet, and I won't be able to test it before next week.
Regards,
Yvan
Not yet, and I won't be able to test it before next week.
Regards,
Yvan
- Fri Aug 19, 2016 12:21 pm
- Forum: Discussion
- Topic: boundary contribution in cocg_s_it
- Replies: 4
- Views: 5120
Re: boundary contribution in cocg_s_it
Hello Cedric,
I'm not sure (and am answering from my phone, not computer), but you may have a function in cs_mesh_quantities.c whic computes cocg (and not cocg_lsq). The name probably does not include "_it".
Regards,
Yvan
I'm not sure (and am answering from my phone, not computer), but you may have a function in cs_mesh_quantities.c whic computes cocg (and not cocg_lsq). The name probably does not include "_it".
Regards,
Yvan
- Thu Aug 18, 2016 2:08 pm
- Forum: code_saturne usage
- Topic: Result display problem
- Replies: 1
- Views: 2190
Re: Result display problem
Hello, This should be in "usage", not "discussion". Did you check the temporary execution directory ? The path of this directory should be listed near the beginning of the batch log output file. Also, in case of driver/hardware issues, the error messages should also appear in a b...
- Thu Aug 18, 2016 10:35 am
- Forum: code_saturne usage
- Topic: Periodic Boundaries problem
- Replies: 3
- Views: 2557
Re: Periodic Boundaries problem
Hello,
In any case, you must not define a periodicity in y (a peruodicity with 0 distance).
For the othet case, I won't be able to check before a week.
Regards,
Yvan
In any case, you must not define a periodicity in y (a peruodicity with 0 distance).
For the othet case, I won't be able to check before a week.
Regards,
Yvan
- Thu Aug 18, 2016 10:32 am
- Forum: code_saturne usage
- Topic: Stop to avoid exceeding time allocation.
- Replies: 7
- Views: 4093
Re: Stop to avoid exceeding time allocation.
Hello,
You did not answer my previous question, which is probably related to the answer...
Regards,
Yvan
You did not answer my previous question, which is probably related to the answer...
Regards,
Yvan