# Makefile.in generated by automake 1.16.3 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994-2020 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#-------------------------------------------------------------------------------

# This file is part of code_saturne, a general-purpose CFD tool.
#
# Copyright (C) 1998-2023 EDF S.A.
#
# This program is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any later
# version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along with
# this program; if not, write to the Free Software Foundation, Inc., 51 Franklin
# Street, Fifth Floor, Boston, MA 02110-1301, USA.

#-------------------------------------------------------------------------------




am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/code_saturne
pkgincludedir = $(includedir)/code_saturne
pkglibdir = $(libdir)/code_saturne
pkglibexecdir = $(libexecdir)/code_saturne
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = x86_64-pc-linux-gnu
target_triplet = x86_64-pc-linux-gnu
#am__append_1 = bin/code_saturne.py
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/cs_amgx.m4 \
	$(top_srcdir)/m4/cs_blas.m4 $(top_srcdir)/m4/cs_catalyst.m4 \
	$(top_srcdir)/m4/cs_ccm.m4 $(top_srcdir)/m4/cs_cgns.m4 \
	$(top_srcdir)/m4/cs_coolprop.m4 $(top_srcdir)/m4/cs_cuda.m4 \
	$(top_srcdir)/m4/cs_docs.m4 $(top_srcdir)/m4/cs_eos.m4 \
	$(top_srcdir)/m4/cs_fortran.m4 \
	$(top_srcdir)/m4/cs_freesteam.m4 $(top_srcdir)/m4/cs_hdf5.m4 \
	$(top_srcdir)/m4/cs_hypre.m4 $(top_srcdir)/m4/cs_med.m4 \
	$(top_srcdir)/m4/cs_medcoupling.m4 \
	$(top_srcdir)/m4/cs_melissa.m4 $(top_srcdir)/m4/cs_metis.m4 \
	$(top_srcdir)/m4/cs_modules.m4 $(top_srcdir)/m4/cs_mpi.m4 \
	$(top_srcdir)/m4/cs_mumps.m4 $(top_srcdir)/m4/cs_petsc.m4 \
	$(top_srcdir)/m4/cs_ple.m4 $(top_srcdir)/m4/cs_salome.m4 \
	$(top_srcdir)/m4/cs_scotch.m4 $(top_srcdir)/m4/cs_zlib.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(dist_pkgdata_SCRIPTS) \
	$(dist_pkgdata_DATA) $(nobase_dist_pkgdata_DATA) \
	$(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = cs_config.h
CONFIG_CLEAN_FILES = docs/style/csvers.tex \
	config/code_saturne_build.cfg.in
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(bindir)" \
	"$(DESTDIR)$(man1dir)" "$(DESTDIR)$(bashcompletiondir)" \
	"$(DESTDIR)$(batchdir)" "$(DESTDIR)$(pkgdatadir)" \
	"$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(sysconfdir)" \
	"$(DESTDIR)$(pkgincludedir)"
SCRIPTS = $(dist_pkgdata_SCRIPTS) $(nodist_bin_SCRIPTS)
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(dist_man_MANS)
DATA = $(bashcompletion_DATA) $(batch_DATA) $(dist_pkgdata_DATA) \
	$(nobase_dist_pkgdata_DATA) $(sysconf_DATA)
HEADERS = $(nodist_pkginclude_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
	cs_config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = . libple preprocessor src python docs tests \
	 $(am__empty)
am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \
	$(srcdir)/cs_config.h.in $(top_srcdir)/build-aux/ar-lib \
	$(top_srcdir)/build-aux/compile \
	$(top_srcdir)/build-aux/config.guess \
	$(top_srcdir)/build-aux/config.sub \
	$(top_srcdir)/build-aux/install-sh \
	$(top_srcdir)/build-aux/missing \
	$(top_srcdir)/config/code_saturne_build.cfg.in.in \
	$(top_srcdir)/docs/style/csvers.tex.in AUTHORS COPYING \
	build-aux/ar-lib build-aux/compile build-aux/config.guess \
	build-aux/config.sub build-aux/install-sh build-aux/missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} '/home/alarat/SRC/code_saturne-8.0.4/build-aux/missing' aclocal-1.16
AMGXRUNPATH = 
AMGX_CPPFLAGS = 
AMGX_LDFLAGS = 
AMGX_LIBS = 
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
AR = ar
AUTOCONF = ${SHELL} '/home/alarat/SRC/code_saturne-8.0.4/build-aux/missing' autoconf
AUTOHEADER = ${SHELL} '/home/alarat/SRC/code_saturne-8.0.4/build-aux/missing' autoheader
AUTOMAKE = ${SHELL} '/home/alarat/SRC/code_saturne-8.0.4/build-aux/missing' automake-1.16
AWK = gawk
BIBTEX = /usr/bin/bibtex
BLASRUNPATH = 
BLAS_CPPFLAGS = 
BLAS_LDFLAGS = 
BLAS_LIBS = 
CATALYST_CPPFLAGS = 
CATALYST_CXXFLAGS = 
CATALYST_LDFLAGS = 
CATALYST_LD_ADD_PATH = 
CATALYST_LIBS = 
CC = mpicc
CCDEPMODE = depmode=gcc3
CCMRUNPATH = 
CCM_CPPFLAGS = 
CCM_LDFLAGS = 
CCM_LIBS = 
CFLAGS = -funsigned-char -W -Wall -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Wunused -Wfloat-equal -Werror=implicit-function-declaration -Wmisleading-indentation -Wduplicated-cond -fdiagnostics-color=auto -Werror=format-security  -fopenmp
CFLAGS_DBG = 
CFLAGS_HOT = -O3 -fexcess-precision=fast 
CFLAGS_OPT = -funroll-loops -O2 -Wuninitialized -fexcess-precision=fast
CFLAGS_SHARED = -fPIC -DPIC
CGNSRUNPATH = 
CGNS_CPPFLAGS = 
CGNS_LDFLAGS = 
CGNS_LIBS = -lcgns
CGNS_ROOT_DIR = 
CMAKE = 
COOLPROPPYTHONPATH = 
COOLPROPRUNPATH = 
COOLPROP_CPPFLAGS = 
COOLPROP_LDFLAGS = 
COOLPROP_LIBS = 
CPP = mpicc -E
CPPFLAGS =   -D_POSIX_C_SOURCE=200809L -DNDEBUG 
CS_LD = mpicxx
CUDA_CPPFLAGS = 
CUDA_LDFLAGS = 
CUDA_LIBS = 
CXX = mpicxx
CXXCPP = mpicxx -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -W -Wall -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wunused -Wfloat-equal -std=c++11 -Wmisleading-indentation -Wduplicated-cond -fdiagnostics-color=auto  -fopenmp
CXXFLAGS_DBG = 
CXXFLAGS_HOT = -O3
CXXFLAGS_OPT = -funroll-loops -O2 -Wuninitialized
CXXFLAGS_SHARED = -fPIC -DPIC
CXXFLAGS_STD = -funsigned-char
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DOT = /usr/bin/dot
DOXYGEN = /usr/bin/doxygen
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EOSRUNPATH = 
EOS_CPPFLAGS = 
EOS_LDFLAGS = 
EOS_LIBS = 
EXEEXT = 
FC = gfortran
FCFLAGS = -x f95-cpp-input -Wall -pedantic-errors -std=f2008 -fdiagnostics-color=auto  -fopenmp
FCFLAGS_DBG = 
FCFLAGS_HOT = -O2 
FCFLAGS_OPT = -O
FCFLAGS_SHARED = -fPIC -DPIC
FCLIBS = -L/usr/lib/gcc/x86_64-linux-gnu/10 -L/lib/x86_64-linux-gnu -L/usr/lib/x86_64-linux-gnu -lgfortran -lm -lquadmath
FCMODEXT = mod
FCMODINCLUDE = -I
FREESTEAMRUNPATH = 
FREESTEAM_CPPFLAGS = 
FREESTEAM_LDFLAGS = 
FREESTEAM_LIBS = 
GREP = /usr/bin/grep
HDF5RUNPATH = 
HDF5_CPPFLAGS = 
HDF5_CPPFLAGS_MPI = -I/usr/lib/x86_64-linux-gnu/openmpi/include -DOMPI_SKIP_MPICXX
HDF5_LDFLAGS = 
HDF5_LDFLAGS_MPI = -L/usr/lib/x86_64-linux-gnu/openmpi/lib
HDF5_LIBS = -lhdf5-shared 
HDF5_LIBS_MPI = 
HDF5_ROOT_DIR = 
HYPRERUNPATH = 
HYPRE_CPPFLAGS = 
HYPRE_LDFLAGS = 
HYPRE_LIBS = 
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LDFLAGS =   -O -Wl,-export-dynamic -fopenmp 
LDFLAGS_SHARED = -shared
LDFLAGS_SONAME = -Wl,-soname -Wl,
LDRPATH = -Wl,-rpath -Wl,
LIBOBJS = 
LIBS = -lz   -ldl
LIB_EXT = so
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINDEX = /usr/bin/makeindex
MAKEINFO = ${SHELL} '/home/alarat/SRC/code_saturne-8.0.4/build-aux/missing' makeinfo
MEDCOUPLINGRUNPATH = 
MEDCOUPLING_CPPFLAGS = 
MEDCOUPLING_LDFLAGS = 
MEDCOUPLING_LIBS = 
MEDCOUPLING_ROOT_DIR = 
MEDFILE_ROOT_DIR = 
MEDRUNPATH = 
MED_CPPFLAGS = 
MED_LDFLAGS = 
MED_LIBS = 
MELISSARUNPATH = 
MELISSA_CPPFLAGS = 
MELISSA_LDFLAGS = 
MELISSA_LIBS = 
METISRUNPATH = 
METIS_CPPFLAGS = 
METIS_LDFLAGS = 
METIS_LIBS = 
MKDIR_P = /usr/bin/mkdir -p
MODULECMD = /usr/share/lmod/lmod/libexec/lmod
MPI_CPPFLAGS = -I/usr/lib/x86_64-linux-gnu/openmpi/include -DOMPI_SKIP_MPICXX
MPI_LDFLAGS = -L/usr/lib/x86_64-linux-gnu/openmpi/lib
MPI_LIBS = 
MUMPSRUNPATH = 
MUMPS_CPPFLAGS = 
MUMPS_LDFLAGS = 
MUMPS_LIBS = 
NEPTUNE_CFD = 
NVCC = 
NVCCCFLAGS_HOT = 
NVCCFLAGS = 
NVCCFLAGS_DBG = 
NVCCFLAGS_OPT = 
OBJEXT = o
PACKAGE = code_saturne
PACKAGE_BUGREPORT = saturne-support@edf.fr
PACKAGE_NAME = code_saturne
PACKAGE_STRING = code_saturne 8.0.4
PACKAGE_TARNAME = code_saturne
PACKAGE_URL = https://code-saturne.org
PACKAGE_VERSION = 8.0.4
PARAVIEW_ROOT_DIR = 
PATH_SEPARATOR = :
PDFLATEX = /usr/bin/pdflatex
PETSC_CPPFLAGS = 
PETSC_LDFLAGS = 
PETSC_LIBS = 
PLERUNPATH = 
PLE_CPPFLAGS = 
PLE_LDFLAGS = 
PLE_LIBS = -lple
POW_LIB = 
PYRCC4 = 
PYRCC5 = /usr/bin/pyrcc5
PYTHON = /usr/bin/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_PLATFORM = linux
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 3.9
PYUIC4 = 
PYUIC5 = /usr/bin/pyuic5
RANLIB = ranlib
SALOMEENVCMD = 
SCOTCHRUNPATH = 
SCOTCH_CPPFLAGS = 
SCOTCH_LDFLAGS = 
SCOTCH_LIBS = 
SED = /usr/bin/sed
SET_MAKE = 
SHARED_LIB_EXT = so
SHELL = /bin/bash
SPHINXBUILD = /usr/bin/sphinx-build
STRIP = 
VERSION = 8.0.4
abs_builddir = /home/alarat/SRC/code_saturne-8.0.4
abs_srcdir = /home/alarat/SRC/code_saturne-8.0.4
abs_top_builddir = /home/alarat/SRC/code_saturne-8.0.4
abs_top_srcdir = /home/alarat/SRC/code_saturne-8.0.4
ac_ct_AR = ar
ac_ct_CC = mpicc
ac_ct_CXX = 
ac_ct_FC = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --format=posix -chf - "$$tardir"
am__untar = tar -xf -
bindir = ${exec_prefix}/bin
build = x86_64-pc-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
cgns_prefix = 
coolprop_prefix = check
cs_cc_version_string = gcc (Debian 10.2.1-6) 10.2.1 20210110
cs_cxx_version_string = g++ (Debian 10.2.1-6) 10.2.1 20210110
cs_enable_mathjax = no
cs_env_modules = 
cs_fc_version_string = GNU Fortran (Debian 10.2.1-6) 10.2.1 20210110
cs_have_amgx = no
cs_have_backend = yes
cs_have_blas = no
cs_have_catalyst = no
cs_have_ccm = no
cs_have_cgns = yes
cs_have_coolprop = no
cs_have_cublas = no
cs_have_cuda = no
cs_have_cusparse = no
cs_have_dot = yes
cs_have_doxygen = yes
cs_have_eos = no
cs_have_freesteam = no
cs_have_frontend = yes
cs_have_gui = yes
cs_have_gui_qt4 = no
cs_have_gui_qt5 = yes
cs_have_hdf5 = yes
cs_have_hypre = no
cs_have_latex = yes
cs_have_long_gnum = yes
cs_have_long_lnum = no
cs_have_med = no
cs_have_medcoupling = no
cs_have_medcoupling_loader = no
cs_have_melissa = no
cs_have_metis = no
cs_have_mpi = yes
cs_have_mumps = no
cs_have_openmp = yes
cs_have_openmp_target = no
cs_have_paramedmem = no
cs_have_petsc = no
cs_have_scotch = no
cs_have_sphinx = yes
cs_ld_default_search_path = /usr/lib/x86_64-linux-gnu/libfakeroot:/lib/i386-linux-gnu:/usr/local/lib:/lib/x86_64-linux-gnu:/lib32:/libx32:/lib
cs_nvcc_version_string = 
cs_py_have_plugin_catalyst = False
cs_py_have_plugin_medcoupling = False
cs_py_have_plugin_melissa = False
cs_py_have_plugins = False
cs_special_user_link = 
cs_tex_path_end = :
cs_tex_path_sep = :
cs_version_lib = 8.0
cs_version_short = 8.0
datadir = ${datarootdir}
datarootdir = ${prefix}/share
debug = no
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
enable_shared = yes
eos_prefix = no
eosversion = 
exec_prefix = ${prefix}
freesteam_prefix = check
hdf5_prefix = 
host = x86_64-pc-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/alarat/SRC/code_saturne-8.0.4/build-aux/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
med_prefix = 
metis_prefix = 
mkdir_p = $(MKDIR_P)
mpi_bindir = /usr/lib/x86_64-linux-gnu/openmpi/bin
mpi_libdir = /usr/lib/x86_64-linux-gnu/openmpi/lib
mpi_prefix = 
mpi_type = OpenMPI
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/code_saturne
pkgpythondir = ${pythondir}/code_saturne
ple_docdir = ${prefix}/share/doc/ple
ple_type = internal
prefix = /home/alarat/Codes/Carambarre/libs/code_saturne-8.0.4
profile = no
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = ${exec_prefix}/lib/python3.9/site-packages
pythondir = ${prefix}/lib/python3.9/site-packages
pythonversion = 
relocatable = no
runstatedir = ${localstatedir}/run
sbindir = ${exec_prefix}/sbin
scotch_prefix = 
sharedstatedir = ${prefix}/com
shell_env = no
srcdir = .
subdirs =  libple
sysconfdir = ${prefix}/etc
target = x86_64-pc-linux-gnu
target_alias = 
target_cpu = x86_64
target_os = linux-gnu
target_vendor = pc
top_build_prefix = 
top_builddir = .
top_srcdir = .
win_prefix = 
PREPRO = preprocessor
DOCS = docs
TSTS = tests
PLE = libple
SUBDIRS = . $(PLE) $(PREPRO) src python $(DOCS) $(TSTS) $(NEPTUNE_CFD)
AUX_DIST = 
MAINTAINERCLEANFILES = \
$(AUX_DIST) \
aclocal.m4 \
configure \
build-aux/ar-lib \
build-aux/compile \
build-aux/config.guess \
build-aux/config.sub \
build-aux/depcomp \
build-aux/install-sh \
build-aux/missing \
build-aux/py-compile


# One adds several sub-directories with a dist-hook.
# The reason for this trick is that
# the number of extra files or patches can grow and change a lot.
EXTRA_DIST = $(AUX_DIST) install_saturne.py INSTALL.md NEWS.md \
	README.md QUALITY_ASSURANCE build-aux/catalyst \
	build-aux/catalyst-5.6 build-aux/cs_build_tools.py \
	build-aux/cs_compile_build.py build-aux/cs_config_test.py \
	build-aux/cs_link_library.py build-aux/cs_user_src_filter.py \
	build-aux/cs_version.py build-aux/list_modules.sh \
	build-aux/mumps.makefile \
	build-aux/petsc-petscvariables.makefile \
	build-aux/petsc-variables.makefile sbin/backup sbin/bootstrap \
	sbin/clean sbin/rmb config/cs_auto_flags.sh \
	config/code_saturne_build.cfg.in.in extras m4 patches \
	bin/code_saturne.py.in bin/code_saturne.sh.in \
	data/thch/dp_radiat_MFS.tar.xz
nodist_pkginclude_HEADERS = \
cs_config.h \
cs_version.h

DISTCLEANFILES = \
bin/code_saturne \
lib/code_saturne_build.cfg \
cs_config.h \
cs_version.h \
libtool_cuda

ACLOCAL_AMFLAGS = -I m4
PYTHON_SHEBANG = $(PYTHON)
#PYTHON_SHEBANG = /usr/bin/env python3

# Replace paths in Python scripts.
# The following command and targets are adapted from an example in
# autoconf. The autoconf documentation recommends changing scripts
# through Makefile targets rather than through configure, and
# cites its own automate and autoheader as examples.
edit_python = sed \
	-e 's|@PYTHON[@]|$(PYTHON_SHEBANG)|g' \
	-e 's|@libdir[@]|$(libdir)|g' \
	-e 's|@pkgpythondir[@]|$(pkgpythondir)|g' \
	-e 's|@relocatable[@]|$(relocatable)|g'

edit_cfg = sed \
	-e 's|@cfg_prefix[@]|$(prefix)|g' \
	-e 's|@cfg_exec_prefix[@]|$(exec_prefix)|g' \
	-e 's|@cfg_bindir[@]|$(bindir)|g' \
	-e 's|@cfg_includedir[@]|$(includedir)|g' \
	-e 's|@cfg_pkgincludedir[@]|$(pkgincludedir)|g' \
	-e 's|@cfg_libdir[@]|$(libdir)|g' \
	-e 's|@cfg_libexecdir[@]|$(libexecdir)|g' \
	-e 's|@cfg_pkglibexecdir[@]|$(pkglibexecdir)|g' \
	-e 's|@cfg_pythondir[@]|$(pythondir)|g' \
	-e 's|@cfg_pkgpythondir[@]|$(pkgpythondir)|g' \
	-e 's|@cfg_localedir[@]|$(localedir)|g' \
	-e 's|@cfg_datarootdir[@]|$(datarootdir)|g' \
	-e 's|@cfg_datadir[@]|$(datadir)|g' \
	-e 's|@cfg_pkgdatadir[@]|$(pkgdatadir)|g' \
	-e 's|@cfg_docdir[@]|$(docdir)|g' \
	-e 's|@cfg_pdfdir[@]|$(pdfdir)|g' \
	-e 's|@cfg_sysconfdir[@]|$(sysconfdir)|g' \
	-e 's|@PACKAGE_NAME[@]|$(PACKAGE_NAME)|g' \
	-e 's|@PACKAGE_VERSION[@]|$(PACKAGE_VERSION)|g' \
	-e 's|@PACKAGE_STRING[@]|$(PACKAGE_STRING)|g' \
	-e 's|@PACKAGE_BUGREPORT[@]|$(PACKAGE_BUGREPORT)|g' \
	-e 's|@PACKAGE_URL[@]|$(PACKAGE_URL)|g'

edit_shell = sed \
	-e 's|@SHELL[@]|$(SHELL)|g' \
	-e 's|@PYTHON[@]|$(PYTHON)|g' \
	-e 's|@cs_env_modules[@]|$(cs_env_modules)|g' \
	-e 's|@shell_env[@]|$(shell_env)|g'

LAUNCHER_EXT = py
#LAUNCHER_EXT = sh
edit_launcher = $(edit_python)
#edit_launcher = $(edit_shell)
BUILT_SOURCES = \
cs_version.h \
lib/code_saturne_build.cfg

CLEANFILES = $(edit_scripts)

# Install binary scripts
nodist_bin_SCRIPTS = bin/code_saturne $(am__append_1)

# Install Python library

# Install user scripts
dist_pkgdata_DATA = \
COPYING

dist_pkgdata_SCRIPTS = \
bin/runcase_mpi_rank


# Install thermochemistry and other data files
nobase_dist_pkgdata_DATA = \
data/thch/dp_C3P_auto \
data/thch/dp_radiat_ADF50 \
data/thch/dp_radiat_ADF8 \
data/thch/dp_radiat_MFS.tar.xz \
data/thch/dp_radiat_Planck_CO2 \
data/thch/dp_radiat_Planck_H2O \
data/thch/dp_radiat_wave \
data/thch/JANAF \
data/user/cs_user_scripts.py \
data/user/dp_C3P \
data/user/dp_C3P_EHC \
data/user/dp_C3P_auto_EHC \
data/user/dp_C3PSJ \
data/user/dp_C4P \
data/user/dp_ELE \
data/user/dp_FUE \
data/user/dp_transformers \
data/user/meteo \
data/setup.xml


# Install batch cards for cluster management
batchdir = ${pkgdatadir}/batch
batch_DATA = \
extras/batch/batch.CCC \
extras/batch/batch.LSF \
extras/batch/batch.OAR \
extras/batch/batch.PBS \
extras/batch/batch.SGE \
extras/batch/batch.SLURM \
extras/batch/batch_help.CCC \
extras/batch/batch_help.LSF \
extras/batch/batch_help.OAR \
extras/batch/batch_help.PBS \
extras/batch/batch_help.SGE \
extras/batch/batch_help.SLURM


# Install man pages
dist_man_MANS = \
docs/manpages/code_saturne.1


# Install bash completion script
bashcompletiondir = ${sysconfdir}/bash_completion.d
bashcompletion_DATA = \
extras/bash_completion/code_saturne


# Install global option file
sysconf_DATA = \
extras/code_saturne.cfg.template


# Generate and install documentation
doc_dirs = $(PLE) docs $(NEPTUNE_CFD)
all: $(BUILT_SOURCES) cs_config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: # $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

cs_config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/cs_config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status cs_config.h
$(srcdir)/cs_config.h.in: # $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f cs_config.h stamp-h1
docs/style/csvers.tex: $(top_builddir)/config.status $(top_srcdir)/docs/style/csvers.tex.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
config/code_saturne_build.cfg.in: $(top_builddir)/config.status $(top_srcdir)/config/code_saturne_build.cfg.in.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-dist_pkgdataSCRIPTS: $(dist_pkgdata_SCRIPTS)
	@$(NORMAL_INSTALL)
	@list='$(dist_pkgdata_SCRIPTS)'; test -n "$(pkgdatadir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pkgdatadir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pkgdatadir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-dist_pkgdataSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_pkgdata_SCRIPTS)'; test -n "$(pkgdatadir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
install-nodist_binSCRIPTS: $(nodist_bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	@list='$(nodist_bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-nodist_binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
install-man1: $(dist_man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(dist_man_MANS)'; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-bashcompletionDATA: $(bashcompletion_DATA)
	@$(NORMAL_INSTALL)
	@list='$(bashcompletion_DATA)'; test -n "$(bashcompletiondir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(bashcompletiondir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(bashcompletiondir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(bashcompletiondir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(bashcompletiondir)" || exit $$?; \
	done

uninstall-bashcompletionDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(bashcompletion_DATA)'; test -n "$(bashcompletiondir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(bashcompletiondir)'; $(am__uninstall_files_from_dir)
install-batchDATA: $(batch_DATA)
	@$(NORMAL_INSTALL)
	@list='$(batch_DATA)'; test -n "$(batchdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(batchdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(batchdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(batchdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(batchdir)" || exit $$?; \
	done

uninstall-batchDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(batch_DATA)'; test -n "$(batchdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(batchdir)'; $(am__uninstall_files_from_dir)
install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
	@$(NORMAL_INSTALL)
	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
	done

uninstall-dist_pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
install-nobase_dist_pkgdataDATA: $(nobase_dist_pkgdata_DATA)
	@$(NORMAL_INSTALL)
	@list='$(nobase_dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
	fi; \
	$(am__nobase_list) | while read dir files; do \
	  xfiles=; for file in $$files; do \
	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
	  test -z "$$xfiles" || { \
	    test "x$$dir" = x. || { \
	      echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)/$$dir'"; \
	      $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)/$$dir"; }; \
	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(pkgdatadir)/$$dir'"; \
	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(pkgdatadir)/$$dir" || exit $$?; }; \
	done

uninstall-nobase_dist_pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nobase_dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
install-sysconfDATA: $(sysconf_DATA)
	@$(NORMAL_INSTALL)
	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(sysconfdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(sysconfdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sysconfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(sysconfdir)" || exit $$?; \
	done

uninstall-sysconfDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(sysconfdir)'; $(am__uninstall_files_from_dir)
install-nodist_pkgincludeHEADERS: $(nodist_pkginclude_HEADERS)
	@$(NORMAL_INSTALL)
	@list='$(nodist_pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \
	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \
	done

uninstall-nodist_pkgincludeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-zstd: distdir
	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	*.tar.zst*) \
	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(SCRIPTS) $(MANS) $(DATA) $(HEADERS) cs_config.h \
		all-local
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(bashcompletiondir)" "$(DESTDIR)$(batchdir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(sysconfdir)" "$(DESTDIR)$(pkgincludedir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-bashcompletionDATA install-batchDATA \
	install-data-local install-dist_pkgdataDATA \
	install-dist_pkgdataSCRIPTS install-man \
	install-nobase_dist_pkgdataDATA \
	install-nodist_pkgincludeHEADERS

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-nodist_binSCRIPTS install-sysconfDATA

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man: install-man1

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-bashcompletionDATA uninstall-batchDATA \
	uninstall-dist_pkgdataDATA uninstall-dist_pkgdataSCRIPTS \
	uninstall-local uninstall-man \
	uninstall-nobase_dist_pkgdataDATA uninstall-nodist_binSCRIPTS \
	uninstall-nodist_pkgincludeHEADERS uninstall-sysconfDATA

uninstall-man: uninstall-man1

.MAKE: $(am__recursive_targets) all check install install-am \
	install-exec install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
	am--refresh check check-am clean clean-cscope clean-generic \
	cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
	dist-zip dist-zstd distcheck distclean distclean-generic \
	distclean-hdr distclean-tags distcleancheck distdir \
	distuninstallcheck dvi dvi-am html html-am info info-am \
	install install-am install-bashcompletionDATA \
	install-batchDATA install-data install-data-am \
	install-data-local install-dist_pkgdataDATA \
	install-dist_pkgdataSCRIPTS install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-man1 \
	install-nobase_dist_pkgdataDATA install-nodist_binSCRIPTS \
	install-nodist_pkgincludeHEADERS install-pdf install-pdf-am \
	install-ps install-ps-am install-strip install-sysconfDATA \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
	uninstall-am uninstall-bashcompletionDATA uninstall-batchDATA \
	uninstall-dist_pkgdataDATA uninstall-dist_pkgdataSCRIPTS \
	uninstall-local uninstall-man uninstall-man1 \
	uninstall-nobase_dist_pkgdataDATA uninstall-nodist_binSCRIPTS \
	uninstall-nodist_pkgincludeHEADERS uninstall-sysconfDATA

.PRECIOUS: Makefile


bin/code_saturne: Makefile
	rm -f $@ $@.tmp
	$(MKDIR_P) bin
	srcdir=''; \
	test -f ./$@.$(LAUNCHER_EXT).in || srcdir=$(srcdir)/; \
	$(edit_launcher) $${srcdir}$@.$(LAUNCHER_EXT).in >$@.tmp
	mv $@.tmp $@
	$(PYTHON) ${top_srcdir}/build-aux/cs_version.py --replace $@ $@

#bin/code_saturne.py: Makefile $(srcdir)/bin/code_saturne.py.in
#	rm -f $@ $@.tmp
#	$(MKDIR_P) bin
#	srcdir=''; \
#	test -f ./$@.in || srcdir=$(srcdir)/; \
#	$(edit_python) $${srcdir}$@.in >$@.tmp;
#	mv $@.tmp $@

bin/code_saturne: $(srcdir)/bin/code_saturne.$(LAUNCHER_EXT).in

cs_version.h: Makefile $(top_srcdir)/src/base/cs_version.h.in
	$(PYTHON) ${top_srcdir}/build-aux/cs_version.py --replace ${top_srcdir}/src/base/cs_version.h.in cs_version.h

lib/code_saturne_build.cfg: Makefile config/code_saturne_build.cfg.in
	rm -f $@ $@.tmp
	$(MKDIR_P) lib
	srcdir=''; \
	$(edit_cfg) config/code_saturne_build.cfg.in >$@.tmp
	mv $@.tmp $@
	$(PYTHON) ${top_srcdir}/build-aux/cs_version.py --replace $@ $@

doc:
	for p in $(doc_dirs); do \
	  cd $$p && $(MAKE) $(AM_MAKEFLAGS) doc ;\
	  cd $(abs_top_builddir) ;\
	done

install-doc:
	for p in $(doc_dirs); do \
	  cd $$p && $(MAKE) $(AM_MAKEFLAGS) install-doc ;\
	  cd $(abs_top_builddir) ;\
	done

# Update Copyright

update-name:
	lst=`find ${top_srcdir} -type d \( -name .git -o -name "build*" \) -prune -o \( -type f -a ! -name Makefile.in \) -print`; \
	for f in $$lst; do \
	  echo $$f && \
	  $(SED) -i "s/code_saturne documentation page/code_saturne documentation page/" $$f; \
	done

update-copyright:
	y=`date +%Y`; yold=$$(($$y-1)); \
	lst=`find ${top_srcdir} -type d \( -name .git -o -name "build*" \) -prune -o \( -type f -a ! -name Makefile.in \) -print`; \
	for f in $$lst; do \
	  echo $$f && \
	  $(SED) -i "s/Copyright (C) 1998-$${yold} EDF S.A./Copyright (C) 1998-$$y EDF S.A./" $$f; \
	done

dist-hook:
	$(PYTHON) ${top_srcdir}/build-aux/cs_version.py --full > $(distdir)/build-aux/version

# Additional local targets

all-local:
	@$(PYTHON) ${top_srcdir}/build-aux/cs_version.py --replace ${top_srcdir}/src/base/cs_version.h.in cs_version.h
	@if test -f bin/cs_package.py; then \
	  $(PYTHON) ${top_srcdir}/build-aux/cs_version.py --replace bin/cs_package.py bin/cs_package.py; \
	fi

install-data-local:
	@$(NORMAL_INSTALL)
	$(MKDIR_P) "$(DESTDIR)$(libdir)"
	cp lib/code_saturne_build.cfg "$(DESTDIR)$(libdir)/code_saturne_build.cfg"
	test -z "$(pkgdatadir)/data/thch" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)/data/thch"
	tar xvJf "$(top_srcdir)/data/thch/dp_radiat_MFS.tar.xz" -C "$(DESTDIR)$(pkgdatadir)/data/thch"

uninstall-local:
	rm -rf "$(DESTDIR)$(pkgdatadir)/data/thch/dp_radiat_MFS"
	rm -f"$(DESTDIR)$(libdir)"
	@$(NORMAL_UNINSTALL)

install-shortcut:
	@$(NORMAL_INSTALL)
	@if test "${cs_have_gui}" != "yes"; then \
		echo "Cannot install shortcut without GUI support"; \
		exit 1 ; \
	fi; \
	DESKTOPPATH=`xdg-user-dir DESKTOP 2>/dev/null` ; \
	if test "$${DESKTOPPATH}" = "" ; then \
		if test -d "$${HOME}/Desktop" ; then \
		  DESKTOPPATH=$${HOME}/Desktop ; \
		elif test -d "$${HOME}/Bureau" ; then \
		  DESKTOPPATH=$${HOME}/Bureau ; \
		else \
			DESKTOPPATH="none" ; \
		fi ; \
	fi ; \
	if test "$${DESKTOPPATH}" = "none" ; then \
		echo "Could not find DESKTOPPATH" ; \
		exit 1 ; \
	fi ; \
	if test ! -d "$${DESKTOPPATH}" ; then \
		echo "'$${DESKTOPPATH}' is not a folder" ; \
		exit 1 ; \
	fi ; \
	if test "${shortcut-solver}" != "" ; then \
	  DESKTOPSOLVER="${shortcut-solver}" ; \
	else \
	  DESKTOPSOLVER=code_saturne ; \
	fi ; \
	cp "$(top_srcdir)/extras/code_saturne.desktop.template" "$${DESKTOPPATH}/code_saturne_$(VERSION).desktop"; \
	sed -i -e 's|CSPATH|$(prefix)|g' $${DESKTOPPATH}/code_saturne_$(VERSION).desktop; \
	sed -i -e 's|CSVERSION|$(VERSION)|g' $${DESKTOPPATH}/code_saturne_$(VERSION).desktop ; \
	sed -i -e 's|DSOLVER|'$${DESKTOPSOLVER}'|g' $${DESKTOPPATH}/code_saturne_$(VERSION).desktop ;

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: