Sourcing SYRTHES environment: /home/alarat/Codes/Carambarre/libs/syrthes-5.0/bin/syrthes.profile
 Coupling execution between: 
   o code_saturne [1 domain(s)];
   o SYRTHES      [1 domain(s)];


                      code_saturne
                      ============

Version:   8.0.4
Path:      /home/alarat/Codes/Carambarre/libs/code_saturne-8.0.4

Result directory:
  /home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/RESU_COUPLING/20250617-1117

Copying base setup data
-----------------------

Compiling and linking user-defined functions
--------------------------------------------

Preparing calculation data
--------------------------

 SYRTHES home directory: /home/alarat/SRC/syrthes5.0/arch/Linux_x86_64
 MPI home directory: /usr
 Building the the executable file syrthes.. 
Compiling command :  make CFD=yes 2>&1 >| /home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/RESU_COUPLING/20250617-1117/SOLID/compile.log
executed from :  /home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/RESU_COUPLING/20250617-1117/SOLID/src

  *****  SYRTHES compilation and link completed *****

 code_saturne domain "FLUID" on 1 process(es).
 SYRTHES domain "SOLID" on 1 process(es).

Preprocessing calculation
-------------------------


  SYRTHES Case summary:

    Name =                         SOLID
    Data file =                    syrthes-saturne_coupling.syd
    Update Data file =             True
    Do preprocessing =             True
    Debug =                        False
    Case dir. =                    /home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/SOLID
    Execution dir. =               /home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/RESU_COUPLING/20250617-1117/SOLID
    Data dir. =                    /home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/SOLID
    Source dir. =                  /home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/SOLID
    Post dir. =                    /home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/RESU_COUPLING/20250617-1117/SOLID/POST

    Conduction mesh dir. =         /home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/MESH/SOLID
    Conduction mesh name =         3rond2d.syr

    Total num. of processes =      1
    Logfile name            =      syrthes2_listing
    Echo =                         True
    Parallel run =                 False
    Do preprocessing =             True

   SYRTHES Param summary
    Param file name =            syrthes-saturne_coupling.syd
    Conduction mesh name =       /home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/MESH/SOLID/3rond2d.syr
    Radiation mesh name =        None
    1D fluid mesh name =         None
    Result prefix. =             resultats_syrthes
    Restart =                    False
    Coupling =                   True
    1D Coupling =                False
    0D Coupling =                False
    Interpreted functions =      False
    Monte-Carlo =                False

  ---------------------------
  Start SYRTHES preprocessing
  ---------------------------

Updating the mesh file name.. 
   -> OK

Starting calculation
--------------------

--------------------------------------------------------------------------
mpiexec has exited due to process rank 1 with PID 0 on
node po21210 exiting improperly. There are three reasons this could occur:

1. this process did not call "init" before exiting, but others in
the job did. This can cause a job to hang indefinitely while it waits
for all processes to call "init". By rule, if one process calls "init",
then ALL processes must call "init" prior to termination.

2. this process called "init", but exited without calling "finalize".
By rule, all processes that call "init" MUST call "finalize" prior to
exiting or it will be considered an "abnormal termination"

3. this process called "MPI_Abort" or "orte_abort" and the mca parameter
orte_create_session_dirs is set to false. In this case, the run-time cannot
detect that the abort call was an abnormal termination. Hence, the only
error message you will receive is this one.

This may have caused other processes in the application to be
terminated by signals sent by mpiexec (as reported here).

You can avoid this message by specifying -quiet on the mpiexec command line.
--------------------------------------------------------------------------
 solver script exited with status 1.

Error running the coupled calculation.

Either of the coupled codes may have failed.

Check the following log files for details.

Domain FLUID (code_saturne):
  run_solver.log, error*.

Domain SOLID (SYRTHES):
  syrthes.log / listing

S_PATH =  ['/home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/RESU_COUPLING/20250617-1117/run_solver']
Post-calculation operations
---------------------------

Run failed in calculation stage.

Post-processing.. 
  Generation du fichier Ensight/Paraview... 
     --> /home/alarat/SRC/syrthes5.0/arch/Linux_x86_64/bin/syrthes2ensight -m "/home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/MESH/SOLID/3rond2d.syr" -r "/home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/RESU_COUPLING/20250617-1117/SOLID/resultats_syrthes.res" -o "resultats_syrthes"
  Generation du fichier Ensight/Paraview... 
     --> /home/alarat/SRC/syrthes5.0/arch/Linux_x86_64/bin/syrthes2ensight -m "/home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/MESH/SOLID/3rond2d.syr" -r "/home/alarat/Codes/Carambarre/etudes/3_2D_DISKS_2/RESU_COUPLING/20250617-1117/SOLID/resultats_syrthes.rdt" -o "resultats_syrthes_rdt"