<Code_Saturne_GUI case="BC_1" solver_version="5.0" study="pressure_control" version="2.0">
	<additional_scalars />
	<analysis_control>
		<error_estimator />
		<output>
			<listing_printing_frequency>500</listing_printing_frequency>
			<mesh id="-1" label="Fluid domain" type="cells">
				<all_variables status="on" />
				<location>all[]</location>
				<writer id="-1" />
			</mesh>
			<mesh id="-2" label="Boundary" type="boundary_faces">
				<all_variables status="on" />
				<location>all[]</location>
				<writer id="-1" />
			</mesh>
			<probe name="1" status="on">
				<probe_x>-0.01049999986</probe_x>
				<probe_y>0</probe_y>
				<probe_z>0.0005000000237</probe_z>
			</probe>
			<probe name="2" status="on">
				<probe_x>-0.003000000259</probe_x>
				<probe_y>0</probe_y>
				<probe_z>0.0005000000237</probe_z>
			</probe>
			<probe name="3" status="on">
				<probe_x>0.004499999806</probe_x>
				<probe_y>0</probe_y>
				<probe_z>0.0005000000237</probe_z>
			</probe>
			<probe name="4" status="on">
				<probe_x>0.01199999917</probe_x>
				<probe_y>0</probe_y>
				<probe_z>0.0005000000237</probe_z>
			</probe>
			<probe name="5" status="on">
				<probe_x>0.0195000004</probe_x>
				<probe_y>0</probe_y>
				<probe_z>0.0005000000237</probe_z>
			</probe>
			<probe name="6" status="on">
				<probe_x>-0.01425000001</probe_x>
				<probe_y>0.00224000006</probe_y>
				<probe_z>0.0005000000237</probe_z>
			</probe>
			<probe name="7" status="on">
				<probe_x>-0.006750000175</probe_x>
				<probe_y>0.00224000006</probe_y>
				<probe_z>0.0005000000237</probe_z>
			</probe>
			<probe name="8" status="on">
				<probe_x>0.0007500002976</probe_x>
				<probe_y>0.00224000006</probe_y>
				<probe_z>0.0005000000237</probe_z>
			</probe>
			<probe name="9" status="on">
				<probe_x>0.008249999024</probe_x>
				<probe_y>0.00224000006</probe_y>
				<probe_z>0.0005000000237</probe_z>
			</probe>
			<probe name="10" status="on">
				<probe_x>0.01575000025</probe_x>
				<probe_y>0.00224000006</probe_y>
				<probe_z>0.0005000000237</probe_z>
			</probe>
			<probe name="11" status="on">
				<probe_x>-0.01</probe_x>
				<probe_y>0</probe_y>
				<probe_z>0.005</probe_z>
			</probe>
			<probe name="12" status="on">
				<probe_x>-0.01</probe_x>
				<probe_y>0</probe_y>
				<probe_z>-0.005</probe_z>
			</probe>
			<probe_format choice="DAT" />
			<probe_recording_frequency>1</probe_recording_frequency>
			<writer id="-1" label="results">
				<directory name="postprocessing" />
				<format name="ensight" options="" />
				<frequency period="none" />
				<output_at_end status="on" />
				<time_dependency choice="fixed_mesh" />
			</writer>
		</output>
		<profiles />
		<scalar_balances />
		<steady_management status="off" />
		<time_averages>
			<time_average id="1" label="TimeAvVelX" name="TimeAvVelX">
				<time_start>-1</time_start>
				<time_step_start>1000</time_step_start>
				<var_prop component="0" name="velocity" />
			</time_average>
			<time_average id="2" label="TimeAvVelY" name="TimeAvVelY">
				<time_start>-1</time_start>
				<time_step_start>1000</time_step_start>
				<var_prop component="1" name="velocity" />
			</time_average>
			<time_average id="3" label="TimeAvVelZ" name="TimeAvVelZ">
				<time_start>-1</time_start>
				<time_step_start>1000</time_step_start>
				<var_prop component="2" name="velocity" />
			</time_average>
			<time_average id="4" label="TimeAvVelX2" name="TimeAvVelX2">
				<time_start>-1</time_start>
				<time_step_start>1000</time_step_start>
				<var_prop component="0" name="velocity" />
				<var_prop component="0" name="velocity" />
			</time_average>
			<time_average id="5" label="TimeAvVelY2" name="TimeAvVelY2">
				<time_start>-1</time_start>
				<time_step_start>1000</time_step_start>
				<var_prop component="1" name="velocity" />
				<var_prop component="1" name="velocity" />
			</time_average>
			<time_average id="6" label="TimeAvVelZ2" name="TimeAvVelZ2">
				<time_start>-1</time_start>
				<time_step_start>1000</time_step_start>
				<var_prop component="2" name="velocity" />
				<var_prop component="2" name="velocity" />
			</time_average>
		</time_averages>
		<time_parameters>
			<iterations>30000</iterations>
			<property label="CourantNb" name="courant_number" />
			<property label="FourierNb" name="fourier_number" />
			<time_passing>0</time_passing>
			<time_step_ref>0.001</time_step_ref>
			<zero_time_step status="off" />
		</time_parameters>
	</analysis_control>
	<boundary_conditions>
		<boundary label="BC_1" name="1" nature="inlet">COLDINLET</boundary>
		<boundary label="BC_2" name="2" nature="imposed_p_outlet">COLDOUTLET</boundary>
		<boundary label="BC_3" name="3" nature="inlet">HOTINLET</boundary>
		<boundary label="BC_4" name="4" nature="outlet">HOTOUTLET</boundary>
		<boundary label="BC_5" name="5" nature="symmetry">SYMMETRY1</boundary>
		<boundary label="BC_6" name="6" nature="symmetry">SYMMETRY2</boundary>
		<boundary label="BC_7" name="7" nature="wall">WALL</boundary>
		<imposed_p_outlet field_id="none" label="BC_2">
			<dirichlet name="pressure">110000</dirichlet>
		</imposed_p_outlet>
		<inlet field_id="none" label="None">
			<turbulence choice="hydraulic_diameter">
				<hydraulic_diameter>1</hydraulic_diameter>
			</turbulence>
			<velocity_pressure choice="norm" direction="normal">
				<norm>1</norm>
			</velocity_pressure>
		</inlet>
		<inlet field_id="none" label="BC_1">
			<turbulence choice="hydraulic_diameter">
				<hydraulic_diameter>1</hydraulic_diameter>
			</turbulence>
			<velocity_pressure choice="norm" direction="normal">
				<norm>30</norm>
			</velocity_pressure>
		</inlet>
		<inlet field_id="none" label="BC_3">
			<turbulence choice="hydraulic_diameter">
				<hydraulic_diameter>1</hydraulic_diameter>
			</turbulence>
			<velocity_pressure choice="norm" direction="normal">
				<norm>30</norm>
			</velocity_pressure>
		</inlet>
		<outlet field_id="none" label="None" />
		<outlet field_id="none" label="BC_4" />
		<symmetry field_id="none" label="BC_5" />
		<symmetry field_id="none" label="BC_6" />
		<wall field_id="none" label="BC_7">
			<velocity_pressure choice="off">
				<dirichlet component="0" name="velocity">0</dirichlet>
				<dirichlet component="1" name="velocity">0</dirichlet>
				<dirichlet component="2" name="velocity">0</dirichlet>
			</velocity_pressure>
		</wall>
	</boundary_conditions>
	<calculation_management>
		<block_io />
		<partitioning>
			<type>metis</type>
		</partitioning>
		<run_type>standard</run_type>
		<start_restart>
			<frozen_field status="off" />
			<restart path="RESU/20200529-1628/checkpoint" />
		</start_restart>
	</calculation_management>
	<lagrangian model="off" />
	<numerical_parameters>
		<gradient_reconstruction choice="2" />
		<gradient_transposed status="on" />
		<hydrostatic_pressure status="off" />
		<pressure_relaxation>0.8</pressure_relaxation>
		<velocity_pressure_algo choice="simplec">
			<piso_sweep_number>1</piso_sweep_number>
		</velocity_pressure_algo>
		<velocity_pressure_coupling status="off" />
		<wall_pressure_extrapolation>0</wall_pressure_extrapolation>
	</numerical_parameters>
	<physical_properties>
		<fluid_properties>
			<material choice="user_material" />
			<method choice="user_properties" />
			<property choice="constant" label="Density" name="density">
				<initial_value>1.19</initial_value>
				<listing_printing status="off" />
				<postprocessing_recording status="off" />
			</property>
			<property choice="constant" label="LamVisc" name="molecular_viscosity">
				<initial_value>1.814e-05</initial_value>
				<listing_printing status="off" />
				<postprocessing_recording status="off" />
			</property>
			<property choice="constant" label="SpecHeat" name="specific_heat">
				<initial_value>1006.775</initial_value>
				<listing_printing status="off" />
				<postprocessing_recording status="off" />
			</property>
			<property choice="constant" label="ThermalCond" name="thermal_conductivity">
				<initial_value>0.02495</initial_value>
				<listing_printing status="off" />
				<postprocessing_recording status="off" />
			</property>
			<reference choice="user_material" />
		</fluid_properties>
		<gravity>
			<gravity_x>0</gravity_x>
			<gravity_y>0</gravity_y>
			<gravity_z>0</gravity_z>
		</gravity>
		<notebook />
		<omega>
			<omega_x>0</omega_x>
			<omega_y>0</omega_y>
			<omega_z>0</omega_z>
		</omega>
	</physical_properties>
	<solution_domain>
		<extrusion />
		<faces_cutting status="off" />
		<joining />
		<mesh_smoothing status="off" />
		<meshes_list>
			<mesh name="Druck_BC.cgns" />
		</meshes_list>
		<periodicity>
			<face_periodicity mode="translation" name="1">
				<fraction>0.1</fraction>
				<plane>25</plane>
				<selector>SYMMETRY1 or SYMMETRY2</selector>
				<translation>
					<translation_x>0</translation_x>
					<translation_y>0.00896</translation_y>
					<translation_z>0</translation_z>
				</translation>
				<verbosity>1</verbosity>
				<visualization>1</visualization>
			</face_periodicity>
		</periodicity>
		<thin_walls />
		<volumic_conditions>
			<zone groundwater_law="off" head_losses="off" id="1" initialization="on" label="all_cells" mass_source_term="off" momentum_source_term="off" porosity="off" scalar_source_term="off" thermal_source_term="off">all[]</zone>
		</volumic_conditions>
	</solution_domain>
	<thermophysical_models>
		<ale_method status="off">
			<formula>mesh_viscosity_1 = 1;</formula>
			<mesh_viscosity type="isotrop" />
		</ale_method>
		<atmospheric_flows model="off" />
		<compressible_model model="off" />
		<conjugate_heat_transfer>
			<external_coupling />
		</conjugate_heat_transfer>
		<fans />
		<gas_combustion model="off" option="off" />
		<groundwater_model model="off" />
		<head_losses />
		<joule_effect model="off" />
		<radiative_transfer model="off" />
		<reference_values>
			<pressure>100000</pressure>
			<temperature>293.15</temperature>
			<velocity>1</velocity>
		</reference_values>
		<solid_fuels model="off" />
		<thermal_scalar model="off" />
		<turbomachinery model="off">
			<joining />
		</turbomachinery>
		<turbulence model="Rij-EBRSM">
			<gravity_terms status="off" />
			<initialization choice="reference_value" zone_id="1" />
			<property label="TurbVisc" name="turbulent_viscosity">
				<postprocessing_recording status="off" />
			</property>
			<variable label="alpha" name="alpha">
				<blending_factor>0</blending_factor>
				<postprocessing_recording status="off" />
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="epsilon" name="epsilon">
				<blending_factor>0</blending_factor>
				<postprocessing_recording status="off" />
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="r11" name="r11">
				<blending_factor>0</blending_factor>
				<postprocessing_recording status="off" />
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="r12" name="r12">
				<blending_factor>0</blending_factor>
				<postprocessing_recording status="off" />
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="r13" name="r13">
				<blending_factor>0</blending_factor>
				<postprocessing_recording status="off" />
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="r22" name="r22">
				<blending_factor>0</blending_factor>
				<postprocessing_recording status="off" />
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="r23" name="r23">
				<blending_factor>0</blending_factor>
				<postprocessing_recording status="off" />
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="r33" name="r33">
				<blending_factor>0</blending_factor>
				<postprocessing_recording status="off" />
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<wall_function>0</wall_function>
		</turbulence>
		<velocity_pressure>
			<initialization>
				<formula zone_id="1">velocity[0] = 0.;
velocity[1] = 0.;
velocity[2] = 0.;</formula>
			</initialization>
			<property label="Stress" name="stress" support="boundary">
				<postprocessing_recording status="off" />
			</property>
			<property label="Stress, normal" name="stress_normal" support="boundary">
				<postprocessing_recording status="off" />
			</property>
			<property label="Stress, tangential" name="stress_tangential" support="boundary">
				<postprocessing_recording status="off" />
			</property>
			<property label="total_pressure" name="total_pressure" />
			<property label="Yplus" name="yplus" support="boundary" />
			<variable label="Pressure" name="pressure">
				<rhs_reconstruction>2</rhs_reconstruction>
			</variable>
			<variable dimension="3" label="Velocity" name="velocity">
				<blending_factor>1</blending_factor>
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
		</velocity_pressure>
	</thermophysical_models>
</Code_Saturne_GUI>
