<?xml version="1.0" encoding="utf-8"?><Code_Saturne_GUI case="Case-4-CS6.0-MiddleStove" solver_version="6.0" study="Verify-VolumeHeatSource" version="2.0">
  <additional_scalars/>
  <analysis_control>
    <output>
      <listing_printing_frequency>1</listing_printing_frequency>
      <mesh id="-1" label="Fluid domain" type="cells">
        <all_variables status="on"/>
        <location>all[]</location>
        <writer id="-1"/>
      </mesh>
      <mesh id="-2" label="Boundary" type="boundary_faces">
        <all_variables status="on"/>
        <location>all[]</location>
        <writer id="-1"/>
      </mesh>
      <probe_format choice="CSV"/>
      <probe_recording_frequency>1</probe_recording_frequency>
      <writer id="-1" label="results">
        <directory name="postprocessing"/>
        <format name="ensight" options="separate_meshes"/>
        <frequency period="none"/>
        <output_at_end status="on"/>
        <time_dependency choice="fixed_mesh"/>
      </writer>
    </output>
    <profiles/>
    <time_averages/>
    <time_parameters>
      <property label="CourantNb" name="courant_number"/>
      <property label="FourierNb" name="fourier_number"/>
      <time_passing>0</time_passing>
      <time_step_ref>0.1</time_step_ref>
    </time_parameters>
  </analysis_control>
  <boundary_conditions/>
  <calculation_management>
    <block_io/>
    <partitioning/>
    <run_type>mesh preprocess</run_type>
  </calculation_management>
  <lagrangian model="off"/>
  <numerical_parameters>
    <velocity_pressure_algo choice="simplec">
      <piso_sweep_number>1</piso_sweep_number>
    </velocity_pressure_algo>
  </numerical_parameters>
  <physical_properties>
    <fluid_properties>
      <property choice="constant" label="Density" name="density">
        <initial_value>1.17862</initial_value>
        <listing_printing status="off"/>
        <postprocessing_recording status="off"/>
      </property>
      <property choice="constant" label="DiffDyn" name="dynamic_diffusion">
        <initial_value>0.01</initial_value>
        <listing_printing status="off"/>
        <postprocessing_recording status="off"/>
      </property>
      <property choice="constant" label="LamVisc" name="molecular_viscosity">
        <initial_value>1.83e-05</initial_value>
        <listing_printing status="off"/>
        <postprocessing_recording status="off"/>
      </property>
    </fluid_properties>
    <notebook/>
  </physical_properties>
  <solution_domain>
    <extrusion/>
    <faces_cutting status="off"/>
    <joining/>
    <mesh_smoothing status="off"/>
    <meshes_list>
      <mesh name="MSH_Bot_Solid.med"/>
      <mesh name="MSH_Contrictor.med"/>
      <mesh name="MSH_Stove_Solid.med"/>
      <mesh name="MSH_Top_Solid.med"/>
      <meshdir name="../MESH/MiddleStove"/>
    </meshes_list>
    <periodicity/>
    <thin_walls/>
    <volumic_conditions>
      <zone groundwater_law="off" head_losses="off" id="1" initialization="on" label="all_cells" mass_source_term="off" momentum_source_term="off" porosity="off" scalar_source_term="off" thermal_source_term="off">all[]</zone>
    </volumic_conditions>
  </solution_domain>
  <thermophysical_models>
    <ale_method/>
    <atmospheric_flows model="off"/>
    <compressible_model model="off"/>
    <gas_combustion model="off"/>
    <groundwater_model model="off"/>
    <hgn_model model="off"/>
    <joule_effect model="off"/>
    <porosities/>
    <radiative_transfer model="off"/>
    <reference_values>
      <length/>
    </reference_values>
    <solid_fuels model="off"/>
    <source_terms/>
    <thermal_scalar model="off"/>
    <turbulence model="k-epsilon-PL">
      <initialization choice="reference_value" zone_id="1"/>
      <property label="TurbVisc" name="turbulent_viscosity"/>
      <variable label="epsilon" name="epsilon"/>
      <variable label="k" name="k"/>
    </turbulence>
    <velocity_pressure>
      <initialization/>
      <property label="Stress" name="stress" support="boundary"/>
      <property label="Stress, normal" name="stress_normal" support="boundary">
        <postprocessing_recording status="off"/>
      </property>
      <property label="Stress, tangential" name="stress_tangential" support="boundary">
        <postprocessing_recording status="off"/>
      </property>
      <property label="total_pressure" name="total_pressure"/>
      <property label="Yplus" name="yplus" support="boundary"/>
      <variable label="Pressure" name="pressure">
        <rhs_reconstruction>2</rhs_reconstruction>
      </variable>
      <variable dimension="3" label="Velocity" name="velocity">
        <rhs_reconstruction>1</rhs_reconstruction>
      </variable>
    </velocity_pressure>
  </thermophysical_models>
</Code_Saturne_GUI>