Code_Saturne
                      ************

 Version:   5.2-patch
 Path:      /home/jarancio/salome-cfd/Salome_CFD-SCFD_V8_5_0-Code_Saturne-5_2-univ_d54f597c/modules/CFDSTUDY_v52/

 Result directory:
   /home/jarancio/Simulations_CodeSaturne/fulldomain/case1/RESU/20191014-1729



 ****************************
  Preparing calculation data
 ****************************

 Parallel Code_Saturne on 3 processes.


 ***************************
  Preprocessing calculation
 ***************************

['/home/jarancio/salome-cfd/Salome_CFD-SCFD_V8_5_0-Code_Saturne-5_2-univ_d54f597c/modules/CFDSTUDY_v52/libexec/code_saturne/cs_preprocess', '--log', 'preprocessor_01.log', '--out', 'mesh_input/mesh_01', '/home/jarancio/Simulations_CodeSaturne/fulldomain/MESH/downcomer.des']
['/home/jarancio/salome-cfd/Salome_CFD-SCFD_V8_5_0-Code_Saturne-5_2-univ_d54f597c/modules/CFDSTUDY_v52/libexec/code_saturne/cs_preprocess', '--log', 'preprocessor_02.log', '--out', 'mesh_input/mesh_02', '/home/jarancio/Simulations_CodeSaturne/fulldomain/MESH/fdc.des']
['/home/jarancio/salome-cfd/Salome_CFD-SCFD_V8_5_0-Code_Saturne-5_2-univ_d54f597c/modules/CFDSTUDY_v52/libexec/code_saturne/cs_preprocess', '--log', 'preprocessor_03.log', '--out', 'mesh_input/mesh_03', '/home/jarancio/Simulations_CodeSaturne/fulldomain/MESH/pic.des']

 **********************
  Starting calculation
 **********************

*** An error occurred in MPI_Init_thread
*** on a NULL communicator
*** MPI_ERRORS_ARE_FATAL: your MPI job will now abort
[arancio:39569] Local abort before MPI_INIT completed successfully; not able to aggregate error messages, and not able to guarantee that all other processes were killed!
--------------------------------------------------------------------------
It looks like opal_init failed for some reason; your parallel process is
likely to abort. There are many reasons that a parallel process can
fail during opal_init; some of which are due to configuration or
environment problems. This failure appears to be an internal failure;
here's some additional information (which may only be relevant to an
Open MPI developer):

opal_shmem_base_select failed
--> Returned value -1 instead of OPAL_SUCCESS
--------------------------------------------------------------------------
[arancio:39569] [[INVALID],INVALID] ORTE_ERROR_LOG: Error in file runtime/orte_init.c at line 79
--------------------------------------------------------------------------
It looks like MPI_INIT failed for some reason; your parallel process is
likely to abort. There are many reasons that a parallel process can
fail during MPI_INIT; some of which are due to configuration or environment
problems. This failure appears to be an internal failure; here's some
additional information (which may only be relevant to an Open MPI
developer):

ompi_mpi_init: orte_init failed
--> Returned "Error" (-1) instead of "Success" (0)
--------------------------------------------------------------------------
-------------------------------------------------------
Primary job  terminated normally, but 1 process returned
a non-zero exit code.. Per user-direction, the job has been aborted.
-------------------------------------------------------
--------------------------------------------------------------------------
mpiexec.openmpi detected that one or more processes exited with non-zero status, thus causing
the job to be terminated. The first process to do so was:

  Process name: [[20946,1],0]
  Exit code:    1
--------------------------------------------------------------------------
*** An error occurred in MPI_Init_thread
*** on a NULL communicator
*** MPI_ERRORS_ARE_FATAL: your MPI job will now abort
[arancio:39570] Local abort before MPI_INIT completed successfully; not able to aggregate error messages, and not able to guarantee that all other processes were killed!
--------------------------------------------------------------------------
It looks like opal_init failed for some reason; your parallel process is
likely to abort. There are many reasons that a parallel process can
fail during opal_init; some of which are due to configuration or
environment problems. This failure appears to be an internal failure;
here's some additional information (which may only be relevant to an
Open MPI developer):

opal_shmem_base_select failed
--> Returned value -1 instead of OPAL_SUCCESS
--------------------------------------------------------------------------
[arancio:39570] [[INVALID],INVALID] ORTE_ERROR_LOG: Error in file runtime/orte_init.c at line 79
--------------------------------------------------------------------------
It looks like MPI_INIT failed for some reason; your parallel process is
likely to abort. There are many reasons that a parallel process can
fail during MPI_INIT; some of which are due to configuration or environment
problems. This failure appears to be an internal failure; here's some
additional information (which may only be relevant to an Open MPI
developer):

ompi_mpi_init: orte_init failed
--> Returned "Error" (-1) instead of "Success" (0)
--------------------------------------------------------------------------
['/home/jarancio/Simulations_CodeSaturne/fulldomain/case1/RESU/20191014-1729/run_solver']

 ****************************
  Saving calculation results
 ****************************

solver script exited with status 1.

Error running the calculation.

Check Code_Saturne log (listing) and error* files for details.

Error in calculation stage.