<?xml version="1.0" encoding="utf-8"?><Code_Saturne_GUI case="u_rbc1" solver_version="4.0" study="SATURNE_V4" version="2.0">
	<additional_scalars>
		<variable label="variance1" name="variance1" type="user">
			<blending_factor>1</blending_factor>
			<max_value>1e+12</max_value>
			<min_value>-1e+12</min_value>
			<order_scheme choice="solu"/>
			<rhs_reconstruction>1</rhs_reconstruction>
			<variance>temperature</variance>
		</variable>
	</additional_scalars>
	<analysis_control>
		<output>
			<listing_printing_frequency>1</listing_printing_frequency>
			<mesh id="-1" label="Fluid domain" type="cells">
				<all_variables status="on"/>
				<location>all[]</location>
				<writer id="-1"/>
			</mesh>
			<mesh id="-2" label="Boundary" type="boundary_faces">
				<all_variables status="on"/>
				<location>all[]</location>
				<writer id="-1"/>
			</mesh>
			<probe name="1" status="on">
				<probe_x>0.2</probe_x>
				<probe_y>0.2</probe_y>
				<probe_z>0.05</probe_z>
			</probe>
			<probe_format choice="CSV"/>
			<probe_recording_frequency>1</probe_recording_frequency>
			<writer id="-1" label="results">
				<directory name="postprocessing"/>
				<format name="ensight" options="binary"/>
				<frequency period="time_step">10000</frequency>
				<output_at_end status="on"/>
				<time_dependency choice="fixed_mesh"/>
			</writer>
		</output>
		<profiles>
			<profile label="profile1" title="profile">
				<format name="CSV"/>
				<formula>x = 4;
y = s;
z = 0.05;</formula>
				<output_frequency>-1</output_frequency>
				<output_type>end</output_type>
				<points>200</points>
				<var_prop component="0" name="temperature"/>
				<var_prop component="0" name="variance1"/>
				<var_prop component="0" name="velocity"/>
				<var_prop component="0" name="r11"/>
				<var_prop component="0" name="r22"/>
				<var_prop component="0" name="r33"/>
			</profile>
		</profiles>
		<steady_management status="off"/>
		<time_averages/>
		<time_parameters>
			<iterations>50000</iterations>
			<max_courant_num>1</max_courant_num>
			<max_fourier_num>10</max_fourier_num>
			<property label="CourantNb" name="courant_number"/>
			<property label="FourierNb" name="fourier_number"/>
			<property label="LocalTime" name="local_time_step">
				<postprocessing_recording status="off"/>
			</property>
			<thermal_time_step status="off"/>
			<time_passing>1</time_passing>
			<time_step_max_factor>1000</time_step_max_factor>
			<time_step_min_factor>0.1</time_step_min_factor>
			<time_step_ref>0.2</time_step_ref>
			<time_step_var>0.1</time_step_var>
			<zero_time_step status="off"/>
		</time_parameters>
	</analysis_control>
	<boundary_conditions>
		<boundary label="top_wall" name="1" nature="wall">5</boundary>
		<boundary label="bottom_wall" name="2" nature="wall">3</boundary>
		<boundary label="BC_1" name="3" nature="symmetry">1 or 4</boundary>
		<boundary label="BC_2" name="4" nature="symmetry">2 or 6</boundary>
		<symmetry label="BC_1"/>
		<symmetry label="BC_2"/>
		<variable/>
		<wall label="top_wall">
			<scalar choice="dirichlet" name="temperature" type="thermal">
				<dirichlet>299.5</dirichlet>
			</scalar>
			<velocity_pressure choice="off">
				<dirichlet component="0" name="velocity">0</dirichlet>
				<dirichlet component="1" name="velocity">0</dirichlet>
				<dirichlet component="2" name="velocity">0</dirichlet>
			</velocity_pressure>
		</wall>
		<wall label="bottom_wall">
			<scalar choice="dirichlet" name="temperature" type="thermal">
				<dirichlet>300.5</dirichlet>
			</scalar>
			<velocity_pressure choice="off"/>
		</wall>
	</boundary_conditions>
	<calculation_management>
		<block_io/>
		<partitioning/>
		<start_restart>
			<frozen_field status="off"/>
		</start_restart>
	</calculation_management>
	<lagrangian model="off">
		<output/>
	</lagrangian>
	<numerical_parameters>
		<gradient_reconstruction choice="0"/>
		<gradient_transposed status="on"/>
		<hydrostatic_pressure status="off"/>
		<pressure_relaxation>1</pressure_relaxation>
		<velocity_pressure_algo choice="simplec">
			<piso_sweep_number>1</piso_sweep_number>
		</velocity_pressure_algo>
		<velocity_pressure_coupling status="off"/>
		<wall_pressure_extrapolation>0</wall_pressure_extrapolation>
	</numerical_parameters>
	<physical_properties>
		<fluid_properties>
			<material choice="user_material"/>
			<method choice="user_properties"/>
			<property choice="variable" label="Density" name="density">
				<formula>rho0 = 1.0;

b_const = 9.0e-6;

density = rho0*(1.0-b_const*(temperature-299.5)) ;</formula>
				<initial_value>1.17862</initial_value>
			</property>
			<property choice="constant" label="LamVisc" name="molecular_viscosity">
				<initial_value>1e-05</initial_value>
				<listing_printing status="off"/>
				<postprocessing_recording status="off"/>
			</property>
			<property choice="constant" label="SpecHeat" name="specific_heat">
				<initial_value>1</initial_value>
				<listing_printing status="off"/>
				<postprocessing_recording status="off"/>
			</property>
			<property choice="constant" label="ThermalCond" name="thermal_conductivity">
				<initial_value>1.42857e-05</initial_value>
				<listing_printing status="off"/>
				<postprocessing_recording status="off"/>
			</property>
			<reference choice="user_material"/>
		</fluid_properties>
		<gravity>
			<gravity_x>0</gravity_x>
			<gravity_y>-10</gravity_y>
			<gravity_z>0</gravity_z>
		</gravity>
		<omega>
			<omega_x>0</omega_x>
			<omega_y>0</omega_y>
			<omega_z>0</omega_z>
		</omega>
	</physical_properties>
	<solution_domain>
		<faces_cutting status="off"/>
		<joining/>
		<mesh_smoothing status="off"/>
		<meshes_list>
			<mesh name="Rbc_3_mesh.cgns" path="/scratch/kanawade/Rbc_cs5/MESH"/>
		</meshes_list>
		<periodicity>
			<face_periodicity mode="translation" name="1">
				<fraction>0.1</fraction>
				<plane>25</plane>
				<selector>4 or 1</selector>
				<translation>
					<translation_x>0</translation_x>
					<translation_y>0</translation_y>
					<translation_z>0.1</translation_z>
				</translation>
				<verbosity>1</verbosity>
				<visualization>1</visualization>
			</face_periodicity>
			<face_periodicity mode="translation" name="2">
				<fraction>0.1</fraction>
				<plane>25</plane>
				<selector>6 or 2</selector>
				<translation>
					<translation_x>8</translation_x>
					<translation_y>0</translation_y>
					<translation_z>0</translation_z>
				</translation>
				<verbosity>1</verbosity>
				<visualization>1</visualization>
			</face_periodicity>
		</periodicity>
		<volumic_conditions>
			<zone darcy_law="off" head_losses="off" id="1" initialization="on" label="all_cells" mass_source_term="off" momentum_source_term="off" porosity="off" scalar_source_term="off" thermal_source_term="off">all[]</zone>
		</volumic_conditions>
	</solution_domain>
	<thermophysical_models>
		<ale_method status="off"/>
		<atmospheric_flows model="off"/>
		<compressible_model model="off"/>
		<conjugate_heat_transfer>
			<external_coupling/>
		</conjugate_heat_transfer>
		<darcy_model model="off"/>
		<gas_combustion model="off" option="off"/>
		<joule_effect model="off"/>
		<radiative_transfer model="off">
			<absorption_coefficient type="constant">0</absorption_coefficient>
			<restart status="off"/>
		</radiative_transfer>
		<reference_values>
			<length choice="prescribed">0.07</length>
			<pressure>101325</pressure>
			<velocity>1</velocity>
		</reference_values>
		<solid_fuels model="off"/>
		<thermal_scalar model="temperature_kelvin">
			<property label="Dimensionless Thermal flux" name="boundary_layer_nusselt" support="boundary">
				<postprocessing_recording status="off"/>
			</property>
			<property label="Boundary temperature" name="boundary_temperature" support="boundary"/>
			<property label="Thermal flux" name="thermal_flux" support="boundary"/>
			<property label="Tplus" name="tplus" support="boundary">
				<postprocessing_recording status="off"/>
			</property>
			<variable label="TempK" name="temperature" type="thermal">
				<blending_factor>1</blending_factor>
				<formula zone_id="1">temperature = 299.5;</formula>
				<max_value>1e+12</max_value>
				<min_value>0</min_value>
				<order_scheme choice="solu"/>
				<rhs_reconstruction>1</rhs_reconstruction>
				<turbulent_flux_model>AFM</turbulent_flux_model>
			</variable>
		</thermal_scalar>
		<turbomachinery model="off">
			<joining/>
		</turbomachinery>
		<turbulence model="Rij-EBRSM">
			<initialization choice="reference_value" zone_id="1"/>
			<property label="TurbVisc" name="turbulent_viscosity"/>
			<variable label="alpha" name="alpha">
				<blending_factor>1</blending_factor>
				<order_scheme choice="solu"/>
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="epsilon" name="epsilon">
				<blending_factor>1</blending_factor>
				<order_scheme choice="solu"/>
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="r11" name="r11">
				<blending_factor>1</blending_factor>
				<order_scheme choice="solu"/>
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="r12" name="r12">
				<blending_factor>1</blending_factor>
				<order_scheme choice="solu"/>
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="r13" name="r13">
				<blending_factor>1</blending_factor>
				<order_scheme choice="solu"/>
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="r22" name="r22">
				<blending_factor>1</blending_factor>
				<order_scheme choice="solu"/>
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="r23" name="r23">
				<blending_factor>1</blending_factor>
				<order_scheme choice="solu"/>
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
			<variable label="r33" name="r33">
				<blending_factor>1</blending_factor>
				<order_scheme choice="solu"/>
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
		</turbulence>
		<velocity_pressure>
			<initialization>
				<formula zone_id="1">velocity[0] = 0.;
velocity[1] = 0.;
velocity[2] = 0.;</formula>
			</initialization>
			<property label="Efforts" name="effort" support="boundary"/>
			<property label="Efforts, normal" name="effort_normal" support="boundary">
				<postprocessing_recording status="off"/>
			</property>
			<property label="Efforts, tangential" name="effort_tangential" support="boundary">
				<postprocessing_recording status="off"/>
			</property>
			<property label="total_pressure" name="total_pressure"/>
			<property label="Yplus" name="yplus" support="boundary"/>
			<variable label="Pressure" name="pressure">
				<rhs_reconstruction>2</rhs_reconstruction>
			</variable>
			<variable dimension="3" label="Velocity" name="velocity">
				<blending_factor>1</blending_factor>
				<order_scheme choice="solu"/>
				<rhs_reconstruction>1</rhs_reconstruction>
			</variable>
		</velocity_pressure>
	</thermophysical_models>
</Code_Saturne_GUI>