command: 
 /home/salad/tmp_Saturne/duct_2d.MEI.03191421/cs_solver --mpi --mpi-io off --param 2d_duct_flow.xml

***************************************************************

                                  (R)
                      Code_Saturne

                      Version 2.0.0-rc1


  Copyright (C) 1998-2009 EDF S.A., France

  build Thu 18 Mar 2010 14:29:39 GMT
  MPI version 2.1 (Open MPI)


  The Code_Saturne CFD tool  is free software;
  you can redistribute it and/or modify it under the terms
  of the GNU General Public License as published by the
  Free Software Foundation; either version 2 of the License,
  or (at your option) any later version.

  The Code_Saturne CFD tool is distributed in the hope that
  it will be useful, but WITHOUT ANY WARRANTY; without even
  the implied warranty of MERCHANTABILITY or FITNESS FOR A
  PARTICULAR PURPOSE.  See the GNU General Public License
  for more details.

***************************************************************


Local case configuration:

  Date:              Fri 19 Mar 2010 14:21:22 GMT
  System:            Linux 2.6.31-20-generic
  Machine:           ubuntu
  Processor:         Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
  Memory:            8112960
  User:              salad (Charalambos)
  Directory:         /home/salad/tmp_Saturne/duct_2d.MEI.03191421
  MPI ranks:         4
  I/O mode:          serial IO



===============================================================

                   CALCULATION PREPARATION
                   =======================


 ===========================================================




 Reading file:        preprocessor_output

 No error detected during the data verification
                              (interface, usini1 and others).


 ===========================================================

               CALCULATION PARAMETERS SUMMARY
               ==============================

 -----------------------------------------------------------


 ** DIMENSIONS
    ----------

 --- Geometry
       NPRFML =              1 (Nb max. family properties   )
       NFML   =              6 (Nb families                 )

 --- Physics
       NPHAS  =              1 (Nb phases                   )
       NVAR   =              5 (Nb variables                )
       NSCAL  =              1 (Nb scalars                  )
       NSCAUS =              1 (Nb user scalars             )
       NSCAPP =              0 (Nb specific physics scalars )
       NPROCE =              6 (Nb cell properties          )
       NPROFA =              1 (Nb internal face properties )
       NPROFB =              2 (Nb boundary face properties )


 -----------------------------------------------------------


 ** PHYSICAL PROPERTIES
    -------------------

       GX     =    0.00000E+00 (Gravity x component         )
       GY     =    0.00000E+00 (Gravity y component         )
       GZ     =    0.00000E+00 (Gravity z component         )

       OMEGAX =    0.00000E+00 (Rotation vector x component )
       OMEGAY =    0.00000E+00 (Rotation vector y component )
       OMEGAZ =    0.00000E+00 (Rotation vector z component )
       ICORIO =          0 (Coriolis source terms       )

  -- Phase:          1

       RO0    =    0.11786E+01 (Reference density           )
       VISCL0 =    0.18300E-04 (Ref. molecular dyn. visc.   )
       CP0    =    0.20600E+04 (Ref. specific heat          )
       ICP    =              0 (> 0: variable CP (usphyv)   )
       P0     =    0.10132E+06 (Ref. total pressure         )
       PRED0  =    0.00000E+00 (Ref. reduced pressure       )
       T0     =    0.00000E+00 (Ref. temperature            )

       IROVAR =              1 (Density constant(0) or not(1)
       IVIVAR =              1 (Molec. visc cst.(0) or not(1)

       Initial reference point for pressure
       XYZP0  =    0.00000E+00   0.00000E+00   0.00000E+00

 -----------------------------------------------------------


 ** TURBULENCE
    ----------

 --- Phase:          1

   - Commons                                                 
       ITURB  =              0 (Turbulence model            )
       IDEUCH =              0 (0: one-scale model          )
                               (1: two-scale model          )
                               (2: invariant wall function  )
       YPLULI =    0.23810E+01 (Limit Y+                    )
       ILOGPO =              1 (0: power law (forbidden for
                                              k-epsilon)    )
                               (1: one-scale log law        )
       IGRHOK =              0 (1: computed Grad(rho k)     )
       ISCALT =              1 (Temperature salar number    )

 --- Constants

   - Commons                                                 
       XKAPPA =    0.42000E+00 (Von Karman constant         )
       CSTLOG =    0.52000E+01 (U+=Log(y+)/kappa +CSTLOG    )
       APOW   =    0.83000E+01 (U+=APOW (y+)**BPOW (W&W law))
       BPOW   =    0.14286E+00 (U+=APOW (y+)**BPOW (W&W law))


 -----------------------------------------------------------


 ** SECONDARY VISCOSITY
    -------------------

 --- Phase:          1
       IVISSE =              1 (1: accounted for            )


 -----------------------------------------------------------


 ** TIME STEPPING
    -------------

    STEADY ALGORITHM

 --- Global parameters

       IDTVAR =             -1 (-1: steady algorithm        )
       RELXST =    0.90000E+00 (Reference relaxation coeff. )
                                                             

 --- Frozen velocity field

       ICCVFG =              0 (1: frozen velocity field    )

 --- Per variable relaxation coefficient

---------------------
 RELAXV variable
---------------------
 Pressure  0.1000E+00
 Velocity  0.9000E+00
 Velocity  0.9000E+00
 Velocity  0.9000E+00
 TempC     0.9000E+00
----------------------------

       RELAXV =  [0.,1.]       (relaxation coefficient      )


 -----------------------------------------------------------


 ** CONVECTION - DIFFUSION
    ----------------------

-------------------------------------------------------------
 Variable  ICONV  IDIFF IDIFFT ISCHCV ISSTPC   BLENCV  THETAV
-------------------------------------------------------------
 Pressure      0      1      1      1      0 0.00E+00 0.10E+01
 Velocity      1      1      1      1      0 0.10E+01 0.10E+01
 Velocity      1      1      1      1      0 0.10E+01 0.10E+01
 Velocity      1      1      1      1      0 0.10E+01 0.10E+01
 TempC         1      1      1      1      0 0.10E+01 0.10E+01
-------------------------------------------------------------

       ICONV  =  0 ou  1       (1 for convection active     )
       IDIFF  =  0 ou  1       (1 for total diffusion active)
       IDIFFT =  0 ou  1       (1 for turbulent diff. active)
       ISCHCV =  0 ou  1       (SOLU or CD                  )
       ISSTPC =  0 ou  1       (1: no slope test            )
       BLENCV =  [0.;1.]       (1-upwind proportion         )
       THETAV =  [0.;1.]       (0.5 Crank-Nicolson/AB       )
                               (theta for convection-       )
                               (diffusion terms uses        )
                               ((1-theta).old+theta.new     )


 -----------------------------------------------------------


 ** STOKES
    ------
       IPHYDR =              0 (1: account for explicit
                                   balance between pressure
                                   gradient, gravity source
                                   terms, and head losses     )
       ICALHY =              0 (1: compute hydrastatic
                                   pressure for Dirichlet
                                   conditions for pressure
                                   on outlet                  )
       IPRCO  =              1 (1: pressure-continuity        )
       IPUCOU =              0 (1: reinforced U-P coupling    )
       NTERUP =              1 (n: n sweeps on navsto for
                                   velocity/pressure coupling )

  -- Phase:          1

       IREVMC =              0 (Velocity reconstruction mode)

       ARAK   =    0.10000E+01 (Arakawa factor              )

       ISTMPF =              1 (time scheme for flow
                               (0: explicit (THETFL = 0     )
                               (1: std scheme (Saturne 1.0  )
                               (2: 2nd-order (THETFL = 0.5  )
       THETFL =   -0.99900E+03 (theta for mass flow         )
       IROEXT =              0 (density extrapolation
                               (0: explicit
                               (1: n+thetro with thetro=1/2
                               (2: n+thetro with thetro=1
       THETRO =    0.00000E+00 (theta for density
                               ((1+theta).new-theta.old
       IVIEXT =              0 (total viscosity extrapolation
                               (0: explicit
                               (1: n+thetvi with thetro=1/2
                               (2: n+thetvi with thetro=1
       THETVI =    0.00000E+00 (theta for total viscosity
                               ((1+theta).new-theta.old
       ICPEXT =              0 (specific heat extrapolation
                               (0: explicit
                               (1: n+thetcp with thetro=1/2
                               (2: n+thetcp with thetro=1
       THETCP =    0.00000E+00 (specific heat theta-scheme
                               ((1+theta).new-theta.old
       THETSN =    0.00000E+00 (Nav-Stokes S.T. theta scheme)
                               ((1+theta).new-theta.old
       THETST =    0.00000E+00 (Turbulence S.T. theta-scheme)
                               ((1+theta).new-theta.old
       EPSUP  =    0.10000E-04 (Velocity/pressure coupling
                                stop test                   )


 -----------------------------------------------------------


 ** GRADIENTS CALCULATION
    ---------------------

       IMRGRA =              0 (Reconstruction mode         )
       ANOMAX =    0.78540E+00 (Non-ortho angle: limit for  )
                               (least squares ext. neighbors)

-----------------------------------------------------------
 Variable NSWRGR NSWRSM      EPSRGR      EPSRSM      EXTRAG
-----------------------------------------------------------
 Pressure    100      2  0.1000E-04  0.1000E-07  0.0000E+00
 Velocity    100      1  0.1000E-04  0.1000E-07  0.0000E+00
 Velocity    100      1  0.1000E-04  0.1000E-07  0.0000E+00
 Velocity    100      1  0.1000E-04  0.1000E-07  0.0000E+00
 TempC       100      1  0.1000E-04  0.1000E-07  0.0000E+00
-----------------------------------------------------------  

-----------------------------------
 Variable IRCFLU IMLIGR      CLIMGR
-----------------------------------
 Pressure      1     -1  0.1500E+01
 Velocity      1     -1  0.1500E+01
 Velocity      1     -1  0.1500E+01
 Velocity      1     -1  0.1500E+01
 TempC         1     -1  0.1500E+01
-----------------------------------

       NSWRGR =                (nb sweep gradient reconstr. )
       NSWRSM =                (nb sweep rhs reconstrcution )
       EPSRGR =                (grad. reconstruction prec.  )
       EPSRSM =                (rhs   reconstruction prec.  )
       EXTRAG =  [0.;1.]       (gradients extrapolation     )
       IRCFLU =  0 ou  1       (flow reconstruction         )
       IMLIGR =  < 0, 0 ou 1   (gradient limitation method  )
       CLIMGR =  > 1 ou 1      (gradient limitation coeff.  )


 -----------------------------------------------------------


 ** FACE INTERPOLATION
    ------------------
       IMVISF =              0 (0 arithmetic                )


 -----------------------------------------------------------


 ** CALCULATION OF TEMPORAL MEANS (MOMENTS)
    ---------------------------------------

       NBMOMT =              0 (Number of moments           )

 -----------------------------------------------------------


 ** BASE ITERATIVE SOLVERS
    ----------------------

------------------------------------------
 Variable IRESOL NITMAX      EPSILO IDIRCL
------------------------------------------
 Pressure     -1  10000  0.1000E-07      1
 Velocity     -1  10000  0.1000E-07      1
 Velocity     -1  10000  0.1000E-07      1
 Velocity     -1  10000  0.1000E-07      1
 TempC        -1  10000  0.1000E-07      1
-----------------------------------

       IRESOL =            -1  (automatic solver choice     )
                IPOL*1000 + 0  (p conjuguate gradient       )
                            1  (Jacobi                      )
                IPOL*1000 + 2  (bicgstab                    )
                  avec IPOL    (preconditioning degree      )
       NITMAX =                (max number of iterations    )
       EPSILO =                (resolution precision        )
       IDIRCL = 0 ou 1         (shift diagonal if          
                                ISTAT=0 and no Dirichlet    )


 -----------------------------------------------------------


 ** MULTIGRID
    ---------

       NCEGRM =             30 (Max nb cells coarsest grid  )
       NGRMAX =             25 (Max numeber of levels       )
------------------------------                               
 Variable   IMGR NCYMAX NITMGF                               
------------------------------                               
 Pressure      1    100     10
 Velocity      0    100     10
 Velocity      0    100     10
 Velocity      0    100     10
 TempC         0    100     10
------------------------------

       IMGR   =  0 ou 1        (1: multigrid activated      )
       NCYMAX =                (Max number  of cycles       )
       NITMGF =                (Max nb iter on coarsest grid)


 -----------------------------------------------------------


 ** SCALARS
    -------

       ITBRRB =              0 (T or H reconstruction at bdy)

-------------------------------------------------------------
 Variable Number IPHSCA ISCSTH IVISLS      VISLS0      SIGMAS
-------------------------------------------------------------
 TempC         1      1     -1      0  0.6311E-04  0.1000E+01
-------------------------------------------------------------

------------------------------------------
 Variable Number IPHSCA ISCAVR      RVARFL
------------------------------------------
 TempC         1      1      0  0.8000E+00
------------------------------------------

------------------------------------------------------
 Variable Number IPHSCA ICLVFL      SCAMIN      SCAMAX
------------------------------------------------------
 TempC         1      1     -1  0.4000E+02  0.2000E+03
------------------------------------------------------

-------------------------------------------------------------

       For each scalar, the number indicates it's rank
         in the list of all scalars. User scalars are placed
         first, from 1 to NSCAUS. Specific physics scalars
         are placed at the end, from
         NSCAUS+1 to NSCAPP+NSCAUS=NSCAL.

       IPHSCA =                (Carrier phase               )
       ISCSTH = -1,0, 1 ou 2   (T (C), Passive, T (K) or H  )
       IVISLS = 0 ou >0        (Viscosity: constant or not  )
       VISLS0 = >0             (Reference viscosity         )
       SIGMAS = >0             (Schmidt                     )
       ISCAVR = 0 ou >0        (Associat. scalar if variance)
       RVARFL = >0             (Rf, cf variance dissipation )
       ICLVFL = 0, 1 ou 2      (Variance clipping mode      )
       SCAMIN =                (Min authorized value        )
       SCAMAX =                (Max authorized value        )
        For variances, SCAMIN is ignored and SCAMAX is used
          only if ICLVFL = 2

------------------------------------------------------
   Scalar        THETSS    IVSEXT      THETVS
------------------------------------------------------
          1  0.0000E+00         0  0.0000E+00
------------------------------------------------------

       THETSS =                (theta for source terms      )
                               ((1+theta).new-theta.old     )
       IVSEXT =                (extrap. total viscosity     )
                               (0: explicit                 )
                               (1: n+thetvs with thetvs=1/2 )
                               (2: n+thetvs with thetvs=1   )
       THETVS =                (theta for scalar diffusivity
                               ((1+theta).new-theta.old     )


 -----------------------------------------------------------


 ** CALCULATION MANAGEMENT
    ----------------------

 --- Restarted calculation
       ISUITE =              0 (1: restarted calculuation   )
       ILEAUX =              1 (1: also read  suiamx        )
       IECAUX =              1 (1: also write suiavx        )

       suiamx and suiavx are the auxiliary restart files.

 --- Calculation time
     The numbering of time steps and the measure of simulated
       physical time are absolute values, and not values
       relative to the current calculation.

       INPDT0 =              0 (1: 0 time step calcuation   )
       NTMABS =            100 (Final time step required    )

 --- CPU time margin
       TMARUS =   -0.10000E+01 (CPU time margin before stop )


 -----------------------------------------------------------


 ** INPUT-OUTPUT
    ------------

 --- Restart file
       NTSUIT =              0 (Checkpoint frequency )

 --- EnSight, MED, or CGNS output
       NTCHR  =             -1 (Output frequency     )

       Number Name
            2 Pressure        
            3 VelocityX       
            4 VelocityY       
            5 VelocityZ       
            6 TempC           
            7 Density         
            8 LamVisc         
           11 total_pressure  
         --           --

 --- Probe history files
       NTHIST =              1 (Output frequency     )
       NCAPT  =              9 (Number of probes     )
       NTHSAV =              0 (Checkpoint frequency )

       Number Name                  Nb. probes (-1: all)
            2 Pressure                      -1
            3 VelocityX                     -1
            4 VelocityY                     -1
            5 VelocityZ                     -1
            6 TempC                         -1
            7 Density                       -1
            8 LamVisc                       -1
           11 total_pressure                -1
         --           --                --

 --- Log files
       NTLIST =              1 (Output frequency     )

       Number Name                IWARNI verbosity level
                                      (-999: not applicable)

            2 Pressure                       0
            3 VelocityX                      0
            4 VelocityY                      0
            5 VelocityZ                      0
            6 TempC                          0
            7 Density                     -999
            8 LamVisc                     -999
           11 total_pressure              -999
         --           --                --

 --- Additional post-processing variables
       IPSTDV =            210 (Product of the following     
                                values based on activation  )
       IPSTYP =              2 (Yplus          on boundary  )
       IPSTCL =              3 (Variables      on boundary  )
       IPSTFT =              5 (Thermal flow   on boundary  )
       IPSTFO =              7 (Force exerted  on boundary  )
  and  IPSTDV =              1 (No additional output        )


 -----------------------------------------------------------


 ** FILES
    -----

 --- Standard files

         GEOMETRY  MAIN RESTART  AUX RESTART   STOP
Name        geomet     suiamo     suiamx     ficstp
Unit            10                               12

         MAIN CHECKPOINT  AUX CHECKPOINT
Name        suiava     suiavx

 --- Radiative files

         DATA       RESTART  JANAF   CHECKPOINT
Name      dp_tch   rayamo    JANAF   rayava
Unit          25                25

 --- Lagrangian files

         --- RESTART ---    -- CHECKPOINT -    ---- POST ----
         CALCUL.   STAT.    CALCUL.   STAT.    LOG      HIST.
Name     lagamo   lasamo    lagava   lasava    listla
Unit                                               80  81  82

 --- Other files for Lagrangian module

Unit          50       51       52       53       54
              55       56       57       58       59
              60       61       62       63       64
              65       66       67       68

 --- Developper files for probe history
                IMPHIS(1)         IMPHIS(2)
Unit                   30                31

 --- User files for probe history
                         16 files
 Name and unit
   ush001   ush002   ush003   ush004   ush005   ush006
   ush007   ush008   ush009   ush010   ush011   ush012
   ush013   ush014   ush015   ush016
       33       34       35       36       37       38
       39       40       41       42       43       44
       45       46       47       48

 --- Free user files
                         10 files
 Name and unit
   usrf01   usrf02   usrf03   usrf04   usrf05   usrf06
   usrf07   usrf08   usrf09   usrf10
       70       71       72       73       74       75
       76       77       78       79

 --- Preprocessor files
   Format: 1=Read preprocessor_output file
           0=Standalone solver

 Format          1


 -----------------------------------------------------------


 ** ALE METHOD (MOVING MESH)
    -----------                                              

       IALE   =              0 (1: activated                )
       NALINF =           -999 (Fluid initialization
                                                  iterations)


 -----------------------------------------------------------

 Finished reading:    preprocessor_output

 Reading file:        domain_number_4
 Finished reading:    domain_number_4

 ----------------------------------------------------------

 Halo construction with standard neighborhood
 ============================================

 Interface creation
 Halo creation
 Halo definition
    Local halo definition
    Distant halo creation
    Updating the faces -> cells connectivity

 Halo creation times summary

     Interface creation:                       0.22 s
     Halo creation:                             0.19 s

     Total time for halo creation:              0.41 s

 ----------------------------------------------------------


 Histogram of the number of cells per rank:

    minimum value =               3125
    maximum value =               3125

      1 : [       3125 ;       3125 ] =          4

 ----------------------------------------------------------

 Histogram of the number of standard + halo cells per rank:

    minimum value =               3175
    maximum value =               3225

      1 : [       3175 ;       3185 [ =          2
      2 : [       3185 ;       3195 [ =          0
      3 : [       3195 ;       3205 [ =          0
      4 : [       3205 ;       3215 [ =          0
      5 : [       3215 ;       3225 ] =          2

 ----------------------------------------------------------

 Histogram of the number of ghost cells per rank:

    minimum value =                 50
    maximum value =                100

      1 : [         50 ;         60 [ =          2
      2 : [         60 ;         70 [ =          0
      3 : [         70 ;         80 [ =          0
      4 : [         80 ;         90 [ =          0
      5 : [         90 ;        100 ] =          2

 ----------------------------------------------------------

 Histogram of the number of interior faces per rank:

    minimum value =               6188
    maximum value =               6239

      1 : [       6188 ;       6198 [ =          2
      2 : [       6198 ;       6208 [ =          0
      3 : [       6208 ;       6218 [ =          0
      4 : [       6218 ;       6228 [ =          0
      5 : [       6228 ;       6239 ] =          2

 ----------------------------------------------------------

 Histogram of the number of boundary faces per rank:

    minimum value =               6374
    maximum value =               6426

      1 : [       6374 ;       6384 [ =          2
      2 : [       6384 ;       6394 [ =          0
      3 : [       6394 ;       6405 [ =          0
      4 : [       6405 ;       6415 [ =          0
      5 : [       6415 ;       6426 ] =          2

 ----------------------------------------------------------

 Histogram of the number of interior faces per cell:

    minimum value =                  2
    maximum value =                  4

      1 : [          2 ;          3 [ =          4
      2 : [          3 ;          4 ] =      12496

 ----------------------------------------------------------

 Histogram of the number of neighboring domains per rank:

    minimum value =                  1
    maximum value =                  2

      1 : [          1 ;          2 ] =          4

 ----------------------------------------------------------

 Global definition of the number of elements (cells, vertices, faces...)
Synchronizing cell families

 Renumbering mesh:
 Mesh
     Number of cells:          12500
     Number of interior faces: 24700
     Number of boundary faces: 25600
     Number of vertices:       25602

 Computing geometric quantities (0.0789 s)

 Mesh coordinates:               minimum    and maximum
                       X :  0.0000000e+00  1.0000000e-01
                       Y :  0.0000000e+00  5.0000000e-03
                       Z :  0.0000000e+00  1.0000000e-03

 --- Main Fortran work arrays:
       longia =       192780 (Number of integers)
       longra =       771120 (Number of reals)
       (4 bytes/integer, 8 bytes/real)

 --- User Fortran work arrays:
       nituse =            0 (Number of integers)
       nrtuse =            0 (Number of reals)

 --- Information on the volumes                              
       Minimum control volume      =        0.400000000E-10
       Maximum control volume      =        0.400000000E-10
       Total volume for the domain =        0.500000000E-06
                                                             
 --- Phase:          1
       ALMAX  =    0.79755E-02 (Characteristic length       )
       ALMAX is the cubic root of the domain volume.

                                                             
 ----------------------------------------------------------- 
                                                             
                                                             
 ** VARIABLES INITIALIZATION                                 
    ------------------------                                 
                                                             
 ---------------------------------                           
  Variable  Min. value  Max. value                           
 ---------------------------------                           
  Pressure  0.0000E+00  0.0000E+00
  Velocity  0.5000E-01  0.5000E-01
  Velocity  0.0000E+00  0.0000E+00
  Velocity  0.0000E+00  0.0000E+00
  TempC     0.4000E+02  0.4000E+02
 ---------------------------------                           



-------------------------------------------------------------


ALL PHASES  : 1D-WALL THERMAL MODULE NOT ACTIVATED 
                 NFPT1D =          0

-------------------------------------------------------------


PHASE      1 : HEAD LOSS TREATMENT NOT ACTIVATED 
                 NCEPDC =          0

-------------------------------------------------------------


PHASE      1 : MASS SOURCE TERMS TREATMENT NOT ACTIVATED 
                 NCETSM =          0

-------------------------------------------------------------



===============================================================



                       MAIN CALCULATION                      
                       ================                      


===============================================================




===============================================================


 INSTANT    0.100000000E+01   TIME STEP NUMBER               1
 ============================================================= 


 --- Phase:          1
 ---------------------------------                           
 Property   Min. value  Max. value                           
 ---------------------------------                           
  Density   0.8835E+03  0.8835E+03
  LamVisc   0.1277E-01  0.1277E-01
 ---------------------------------                           

 --- Diffusivity:                                            
 ---------------------------------------                     
 Scalar   Number  Min. value  Max. value                     
 ---------------------------------------                     
 TempC         1  0.6311E-04  0.6311E-04
 ---------------------------------------                     



   ** INFORMATION ON BOUNDARY FACES TYPE
      ----------------------------------

   Phase :    1
-------------------------------------------------------------------------
Boundary type          Code    Nb faces
-------------------------------------------------------------------------
Inlet                     2          50
Smooth wall               5         500
Rough wall                6           0
Symmetry                  4       25000
Free outlet               3          50
Undefined                 1           0
-------------------------------------------------------------------------


PHASE    1 :
Boundary faces with free inlet/outlet detected
Update of reference point for total pressure
 XYZP0 =    0.10000E+00   0.12500E-02   0.50000E-03



   ** BOUNDARY MASS FLOW INFORMATION
      ------------------------------

   Phase :    1
---------------------------------------------------------------
Boundary type          Code    Nb faces           Mass flow
---------------------------------------------------------------
Inlet                     2          50         0.000000000E+00
Smooth wall               5         500         0.000000000E+00
Rough wall                6           0         0.000000000E+00
Symmetry                  4       25000         0.000000000E+00
Free outlet               3          50         0.000000000E+00
Undefined                 1           0         0.000000000E+00
---------------------------------------------------------------


   ** BOUNDARY CONDITIONS FOR SMOOTH WALLS
   ---------------------------------------
------------------------------------------------------------
 Phase      1                            Minimum     Maximum
------------------------------------------------------------
   Rel velocity at the wall uiptn :  0.00000E+00 0.00000E+00
   Friction velocity        uet   :  0.12025E+00 0.12025E+00
   Friction velocity        uk    :  0.00000E+00 0.00000E+00
   Dimensionless distance   yplus :  0.41582E+00 0.41582E+00
   ------------------------------------------------------   
   Nb of reversal of the velocity at the wall   :          0
   Nb of faces within the viscous sub-layer     :        500
   Total number of wall faces                   :        500
------------------------------------------------------------


SIGINT signal (Control+C or equivalent) received.
--> computation interrupted by user.

Call stack:
   1: 0x7f3d8d576420 ?                                (?)
   2: 0x7f3d92d8c05a <opal_progress+0x5a>             (libopen-pal.so.0)
   3: 0x7f3d936945f5 ?                                (?)
   4: 0x7f3d8c4b440a ?                                (?)
   5: 0x7f3d936a8e8c <PMPI_Allreduce+0x17c>           (libmpi.so.0)
   6: 0x7f3d94a0a1dc ?                                (?)
   7: 0x7f3d94a0d680 <cs_sles_solve+0x15e0>           (libsaturne.so.0)
   8: 0x7f3d94a0ee1b <reslin_+0x15b>                  (libsaturne.so.0)
   9: 0x7f3d94b6f150 <invers_+0x250>                  (libsaturne.so.0)
  10: 0x7f3d94a35b83 <codits_+0x14e3>                 (libsaturne.so.0)
  11: 0x7f3d94baf430 <preduv_+0x7d00>                 (libsaturne.so.0)
  12: 0x7f3d94b98229 <navsto_+0xe01>                  (libsaturne.so.0)
  13: 0x7f3d94be1c55 <tridim_+0xa1b5>                 (libsaturne.so.0)
  14: 0x7f3d94a270d5 <caltri_+0x5085>                 (libsaturne.so.0)
  15: 0x7f3d94a024db <cs_run+0x83b>                   (libsaturne.so.0)
  16: 0x7f3d94a027c5 <main+0x1f5>                     (libsaturne.so.0)
  17: 0x7f3d90fa3abd <__libc_start_main+0xfd>         (libc.so.6)
  18: 0x4007a9     ?                                (?)
End of stack


