# Makefile.in generated by automake 1.11.2 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#-------------------------------------------------------------------------------

# This file is part of Code_Saturne, a general-purpose CFD tool.
#
# Copyright (C) 1998-2011 EDF S.A.
#
# This program is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any later
# version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along with
# this program; if not, write to the Free Software Foundation, Inc., 51 Franklin
# Street, Fifth Floor, Boston, MA 02110-1301, USA.

#-------------------------------------------------------------------------------




pkgdatadir = $(datadir)/code_saturne
pkgincludedir = $(includedir)/code_saturne
pkglibdir = $(libdir)/code_saturne
pkglibexecdir = $(libexecdir)/code_saturne
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
target_triplet = x86_64-unknown-linux-gnu
subdir = .
DIST_COMMON = README $(am__configure_deps) $(autovnv_PYTHON) \
	$(dist_man_MANS) $(dist_pkgdata_DATA) $(dist_pkgdata_SCRIPTS) \
	$(dist_pkgpython_PYTHON) $(nobase_dist_pkgdata_DATA) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/cs_config.h.in $(top_srcdir)/bin/SaturneGUI.in \
	$(top_srcdir)/bin/cs_config.py.in $(top_srcdir)/configure \
	$(top_srcdir)/doc/style/csvers.tex.in \
	$(top_srcdir)/extras/salome/fsi_appli_config.xml.in ABOUT-NLS \
	AUTHORS COPYING ChangeLog INSTALL NEWS build-aux/compile \
	build-aux/config.guess build-aux/config.rpath \
	build-aux/config.sub build-aux/depcomp build-aux/install-sh \
	build-aux/ltmain.sh build-aux/missing build-aux/py-compile \
	build-aux/ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
	$(top_srcdir)/m4/cs_adf.m4 $(top_srcdir)/m4/cs_blas.m4 \
	$(top_srcdir)/m4/cs_ccm.m4 $(top_srcdir)/m4/cs_cgns.m4 \
	$(top_srcdir)/m4/cs_docs.m4 $(top_srcdir)/m4/cs_fortran.m4 \
	$(top_srcdir)/m4/cs_hdf5.m4 $(top_srcdir)/m4/cs_libxml2.m4 \
	$(top_srcdir)/m4/cs_med.m4 $(top_srcdir)/m4/cs_metis.m4 \
	$(top_srcdir)/m4/cs_modules.m4 $(top_srcdir)/m4/cs_mpi.m4 \
	$(top_srcdir)/m4/cs_omniorb.m4 $(top_srcdir)/m4/cs_ple.m4 \
	$(top_srcdir)/m4/cs_salome.m4 $(top_srcdir)/m4/cs_scotch.m4 \
	$(top_srcdir)/m4/cs_syrthes.m4 $(top_srcdir)/m4/cs_zlib.m4 \
	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = cs_config.h
CONFIG_CLEAN_FILES = doc/style/csvers.tex \
	extras/salome/fsi_appli_config.xml bin/cs_config.py \
	bin/SaturneGUI
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(bindir)" \
	"$(DESTDIR)$(autovnvdir)" "$(DESTDIR)$(pkgpythondir)" \
	"$(DESTDIR)$(pkgpythondir)" "$(DESTDIR)$(man1dir)" \
	"$(DESTDIR)$(bashcompletiondir)" "$(DESTDIR)$(batchdir)" \
	"$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(pkgdatadir)" \
	"$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(salomedir)" \
	"$(DESTDIR)$(salomedir)" "$(DESTDIR)$(sysconfdir)" \
	"$(DESTDIR)$(pkgincludedir)"
SCRIPTS = $(dist_pkgdata_SCRIPTS) $(nodist_bin_SCRIPTS)
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__py_compile = PYTHON=$(PYTHON) $(SHELL) $(py_compile)
py_compile = $(top_srcdir)/build-aux/py-compile
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(dist_man_MANS)
DATA = $(bashcompletion_DATA) $(batch_DATA) $(dist_pkgdata_DATA) \
	$(nobase_dist_pkgdata_DATA) $(nodist_pkgdata_DATA) \
	$(nodist_salome_DATA) $(salome_DATA) $(sysconf_DATA)
HEADERS = $(nodist_pkginclude_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = libple preprocessor src libsyrcs salome po doc gui \
	tests
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d "$(distdir)" \
    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr "$(distdir)"; }; }
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /home/sovsep/Software/code-saturne/code_saturne-2.1.3/build-aux/missing --run aclocal-1.11
ADFRUNPATH = 
ADF_LDFLAGS = 
ADF_LIBS = 
AMTAR = ${SHELL} /home/sovsep/Software/code-saturne/code_saturne-2.1.3/build-aux/missing --run tar
AM_DEFAULT_VERBOSITY = 1
AR = ar
AUTOCONF = ${SHELL} /home/sovsep/Software/code-saturne/code_saturne-2.1.3/build-aux/missing --run autoconf
AUTOHEADER = ${SHELL} /home/sovsep/Software/code-saturne/code_saturne-2.1.3/build-aux/missing --run autoheader
AUTOMAKE = ${SHELL} /home/sovsep/Software/code-saturne/code_saturne-2.1.3/build-aux/missing --run automake-1.11
AWK = gawk
BLASRUNPATH = 
BLAS_CPPFLAGS = 
BLAS_LDFLAGS = 
BLAS_LIBS = -lcblas -latlas
CC = gcc
CCDEPMODE = depmode=gcc3
CCMRUNPATH = 
CCM_CPPFLAGS = 
CCM_LDFLAGS = 
CCM_LIBS = 
CFLAGS = -std=c99 -funsigned-char -pedantic -W -Wall -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Wunused -Wfloat-equal 
CFLAGS_DBG = 
CFLAGS_EXT = 
CFLAGS_HOT = -O3 -fexcess-precision=fast
CFLAGS_OPT = -funroll-loops -O2 -Wuninitialized -fexcess-precision=fast
CGNSRUNPATH = 
CGNS_CPPFLAGS = 
CGNS_LDFLAGS = 
CGNS_LIBS = -lcgns
CORBA_CXXFLAGS = 
CORBA_INCLUDES = 
CORBA_LIBS = 
CORBA_ROOT = 
CPP = gcc -E
CPPFLAGS =   -D_POSIX_SOURCE -DNDEBUG 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -ansi -funsigned-char -W -Wall -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wunused -Wno-long-long 
CXXFLAGS_DBG = 
CXXFLAGS_HOT = -O3
CXXFLAGS_OPT = -funroll-loops -O2 -Wuninitialized
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
F77 = gfortran
FC = gfortran
FCFLAGS = -x f95-cpp-input -Wall -Wno-unused  -D_CS_FC_HAVE_FLUSH
FCFLAGS_DBG = 
FCFLAGS_HOT = -O2
FCFLAGS_OPT = -O
FCLIBS =  -L/usr/lib/gcc/x86_64-linux-gnu/4.6.1 -L/usr/lib/gcc/x86_64-linux-gnu/4.6.1/../../../x86_64-linux-gnu -L/usr/lib/gcc/x86_64-linux-gnu/4.6.1/../../../../lib -L/lib/x86_64-linux-gnu -L/lib/../lib -L/usr/lib/x86_64-linux-gnu -L/usr/lib/../lib -L/opt/intel/composer_xe_2011_sp1.7.256/compiler/lib/intel64 -L/opt/intel/composer_xe_2011_sp1.7.256/ipp/../compiler/lib/intel64 -L/opt/intel/composer_xe_2011_sp1.7.256/ipp/lib/intel64 -L/opt/intel/composer_xe_2011_sp1.7.256/mkl/lib/intel64 -L/opt/intel/composer_xe_2011_sp1.7.256/tbb/lib/intel64//cc4.1.0_libc2.4_kernel2.6.16.21 -L/opt/intel/Compiler/11.1/072/lib/intel64 -L/opt/intel/Compiler/11.1/072/mkl/lib/em64t -L/usr/lib/gcc/x86_64-linux-gnu/4.6.1/../../.. -lgfortran -lm -lquadmath
FCMODEXT = mod
FCMODINCLUDE = -I
FFLAGS = -g -O2
FGREP = /bin/grep -F
FLIBS = 
GETTEXT_MACRO_VERSION = 0.18
GMSGFMT = /usr/bin/msgfmt
GMSGFMT_015 = /usr/bin/msgfmt
GREP = /bin/grep
HDF5_CPPFLAGS =  -I/usr/include/mpi -DOMPI_SKIP_MPICXX
HDF5_LDFLAGS = 
HDF5_LIBS = -lhdf5 
IDL = 
IDLCXXFLAGS = 
IDLPYFLAGS = 
IDL_CLN_CXX = 
IDL_CLN_H = 
IDL_CLN_OBJ = 
IDL_SRV_CXX = 
IDL_SRV_H = 
IDL_SRV_OBJ = 
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INTLLIBS = 
INTL_MACOSX_LIBS = 
LD = /usr/bin/ld -m elf_x86_64
LDFLAGS = -Wl,-export-dynamic  -O 
LDRPATH = -Wl,-rpath -Wl,
LEX = flex
LEXLIB = -lfl
LEX_OUTPUT_ROOT = lex.yy
LIBICONV = -liconv
LIBINTL = 
LIBOBJS = 
LIBS =   -lz -ldl
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBXML2_CPPFLAGS = -I/usr/include/libxml2
LIBXML2_LDFLAGS = 
LIBXML2_LIBS = -lxml2
LIPO = 
LN_S = ln -s
LRELEASE = /usr/bin/lrelease
LTLIBICONV = -liconv
LTLIBINTL = 
LTLIBOBJS = 
MAINT = #
MAKEINFO = ${SHELL} /home/sovsep/Software/code-saturne/code_saturne-2.1.3/build-aux/missing --run makeinfo
MANIFEST_TOOL = :
MED_CPPFLAGS = 
MED_LDFLAGS = 
MED_LIBS = -lmedC
METIS_CPPFLAGS = 
METIS_LDFLAGS = 
METIS_LIBS = -lparmetis -lmetis -lm
MKDIR_P = /bin/mkdir -p
MOC = /usr/bin/moc
MODULECMD = 
MPI_CPPFLAGS = -I/usr/include/mpi -DOMPI_SKIP_MPICXX
MPI_LDFLAGS = 
MPI_LIBS = -lmpi 
MSGFMT = /usr/bin/msgfmt
MSGFMT_015 = /usr/bin/msgfmt
MSGMERGE = /usr/bin/msgmerge
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OMNIIDL = 
OMNIIDLPYBE = 
OMNIIDLPYTHONPATH = 
OMNIORB_CXXFLAGS = 
OMNIORB_IDLCXXFLAGS = 
OMNIORB_IDLPYFLAGS = 
OMNIORB_IDL_CLN_CXX = 
OMNIORB_IDL_CLN_H = 
OMNIORB_IDL_CLN_OBJ = 
OMNIORB_IDL_SRV_CXX = 
OMNIORB_IDL_SRV_H = 
OMNIORB_IDL_SRV_OBJ = 
OMNIORB_IDL_TIE_CXX = 
OMNIORB_IDL_TIE_H = 
OMNIORB_INCLUDES = 
OMNIORB_LIBS = 
OMNIORB_ROOT = 
OTOOL = 
OTOOL64 = 
PACKAGE = code_saturne
PACKAGE_BUGREPORT = saturne-support@edf.fr
PACKAGE_NAME = code_saturne
PACKAGE_STRING = code_saturne 2.1.3
PACKAGE_TARNAME = code_saturne
PACKAGE_URL = http://www.code-saturne.org
PACKAGE_VERSION = 2.1.3
PATH_SEPARATOR = :
PLE_CPPFLAGS = 
PLE_LDFLAGS = 
PLE_LIBS = -lple
POSUB = po
POW_LIB = 
PTHREAD_CC = gcc
PTHREAD_CFLAGS = -pthread
PTHREAD_LIBS = 
PYRCC4 = /usr/bin/pyrcc4
PYTHON = /usr/bin/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_PLATFORM = linux2
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 2.7
PYUIC4 = /usr/bin/pyuic4
RANLIB = ranlib
SALOMEENVCMD = 
SALOMEPRE = /home/sovsep/opt/salome_6.3.1/env_build.sh
SALOMERUN = 
SALOME_GUI = /home/sovsep/opt/salome_6.3.1/GUI_6.3.1
SALOME_GUI_CPPFLAGS = -I/home/sovsep/opt/salome_6.3.1/GUI_6.3.1/include/salome
SALOME_GUI_IDL = -I/home/sovsep/opt/salome_6.3.1/GUI_6.3.1/idl/salome
SALOME_GUI_LDFLAGS = -L/home/sovsep/opt/salome_6.3.1/GUI_6.3.1/lib/salome
SALOME_GUI_LIBS = 
SALOME_KERNEL = /home/sovsep/opt/salome_6.3.1/KERNEL_6.3.1
SALOME_KERNEL_CPPFLAGS = -I/home/sovsep/opt/salome_6.3.1/KERNEL_6.3.1/include/salome
SALOME_KERNEL_IDL = -I/home/sovsep/opt/salome_6.3.1/KERNEL_6.3.1/idl/salome
SALOME_KERNEL_LDFLAGS = -L/home/sovsep/opt/salome_6.3.1/KERNEL_6.3.1/lib/salome
SALOME_KERNEL_LIBS = -lCalciumC
SALOME_YACS = /usr
SALOME_YACS_CPPFLAGS = -I/usr/include/salome
SALOME_YACS_IDL = -I/usr/idl/salome
SALOME_YACS_LDFLAGS = -L/usr/lib/salome
SALOME_YACS_LIBS = 
SCOTCH_CPPFLAGS =   -D_POSIX_SOURCE -DNDEBUG -I/usr/include/scotch -I/usr/include/mpi -DOMPI_SKIP_MPICXX
SCOTCH_LDFLAGS = 
SCOTCH_LIBS = -lptscotch -lm
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/bash
SPHINX = /usr/bin/sphinx-build
STRIP = strip
SYRTHES_CC = 
SYRTHES_CFLAGS = 
SYRTHES_CPPFLAGS = 
SYRTHES_FC = 
SYRTHES_FCFLAGS = 
SYRTHES_FCLIBS = 
SYRTHES_LDFLAGS = 
SYRTHES_LIBS = 
USE_NLS = yes
VERSION = 2.1.3
XGETTEXT = /usr/bin/xgettext
XGETTEXT_015 = /usr/bin/xgettext
XGETTEXT_EXTRA_OPTIONS = 
YACC = bison -y
YFLAGS = 
abs_builddir = /home/sovsep/Software/code-saturne/code_saturne-2.1.3
abs_srcdir = /home/sovsep/Software/code-saturne/code_saturne-2.1.3
abs_top_builddir = /home/sovsep/Software/code-saturne/code_saturne-2.1.3
abs_top_srcdir = /home/sovsep/Software/code-saturne/code_saturne-2.1.3
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
ac_ct_F77 = gfortran
ac_ct_FC = gfortran
acx_pthread_config = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --format=posix -chf - "$$tardir"
am__untar = tar -xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
cs_env_modules = no
cs_have_adf = no
cs_have_blas = yes
cs_have_ccm = no
cs_have_cgns = yes
cs_have_frontend = yes
cs_have_gui = yes
cs_have_hdf5 = yes
cs_have_libxml2 = yes
cs_have_long_gnum = no
cs_have_med = yes
cs_have_metis = no
cs_have_mpi = yes
cs_have_salome_gui = yes
cs_have_salome_kernel = yes
cs_have_salome_yacs = yes
cs_have_scotch = no
cs_have_socket = yes
datadir = ${datarootdir}
datarootdir = ${prefix}/share
debug = no
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
enable_shared = yes
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/sovsep/Software/code-saturne/code_saturne-2.1.3/build-aux/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
mpi_bindir = 
mpi_libdir = 
mpi_type = OpenMPI
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/code_saturne
pkgpythondir = ${pythondir}/code_saturne
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = ${exec_prefix}/lib/python2.7/dist-packages
pythondir = ${prefix}/lib/python2.7/dist-packages
relocatable = no
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
subdirs =  libple
syrthes_prefix = 
sysconfdir = ${prefix}/etc
target = x86_64-unknown-linux-gnu
target_alias = 
target_cpu = x86_64
target_os = linux-gnu
target_vendor = unknown
top_build_prefix = 
top_builddir = .
top_srcdir = .
GUI = gui
PREPRO = preprocessor
PLE = libple
#PLE_CPPFLAGS_TMP = $(PLE_CPPFLAGS)
PLE_CPPFLAGS_TMP = -I$(includedir)
SALOME = salome
SUBDIRS = $(PLE) $(PREPRO) src libsyrcs $(SALOME) po doc $(GUI) tests
AUX_DIST = \
m4/codeset.m4 \
m4/fcntl-o.m4 \
m4/gettext.m4 \
m4/glibc21.m4 \
m4/glibc2.m4 \
m4/iconv.m4 \
m4/intdiv0.m4 \
m4/intldir.m4 \
m4/intl.m4 \
m4/intlmacosx.m4 \
m4/intmax.m4 \
m4/inttypes_h.m4 \
m4/inttypes-pri.m4 \
m4/lcmessage.m4 \
m4/lib-ld.m4 \
m4/lib-link.m4 \
m4/lib-prefix.m4 \
m4/libtool.m4 \
m4/lock.m4 \
m4/longlong.m4 \
m4/lt~obsolete.m4 \
m4/ltoptions.m4 \
m4/ltsugar.m4 \
m4/ltversion.m4 \
m4/nls.m4 \
m4/po.m4 \
m4/printf-posix.m4 \
m4/progtest.m4 \
m4/size_max.m4 \
m4/stdint_h.m4 \
m4/threadlib.m4 \
m4/uintmax_t.m4 \
m4/visibility.m4 \
m4/wchar_t.m4 \
m4/wint_t.m4 \
m4/xsize.m4

MAINTAINERCLEANFILES = \
$(AUX_DIST) \
aclocal.m4 \
configure \
build-aux/compile \
build-aux/config.guess \
build-aux/config.rpath \
build-aux/config.sub \
build-aux/depcomp \
build-aux/install-sh \
build-aux/ltmain.sh \
build-aux/missing \
build-aux/py-compile \
build-aux/ylwrap


# One adds several sub-directories and get rid of the .svn
# directories with a dist-hook. The reason for this trick is that
# the number of extra files or patches can grow and change a lot.
EXTRA_DIST = $(AUX_DIST) COMPATIBILITY QUALITY_ASSURANCE \
	po/Makevars.template po/Rules-install sbin/backup \
	sbin/bootstrap sbin/clean sbin/rmb config/cs_auto_flags.sh \
	m4/acx_pthread.m4 m4/cs_adf.m4 m4/cs_blas.m4 m4/cs_ccm.m4 \
	m4/cs_cgns.m4 m4/cs_docs.m4 m4/cs_fortran.m4 m4/cs_hdf5.m4 \
	m4/cs_libxml2.m4 m4/cs_med.m4 m4/cs_metis.m4 m4/cs_modules.m4 \
	m4/cs_mpi.m4 m4/cs_omniorb.m4 m4/cs_ple.m4 m4/cs_salome.m4 \
	m4/cs_scotch.m4 m4/cs_syrthes.m4 m4/cs_zlib.m4 examples extras \
	patches bin/code_saturne.in bin/cs_package.py.in \
	bin/runcase_aster.in bin/runcase_coupling.in
nodist_pkginclude_HEADERS = cs_config.h
DISTCLEANFILES = \
bin/code_saturne \
bin/cs_package.py \
bin/runcase_aster \
bin/runcase_coupling \
cs_config.h

ACLOCAL_AMFLAGS = -I m4
CS_LD = $(CC)

# Replace paths in Python scripts.
# The following command and targets are adapted from an example in
# autoconf. The autoconf documentation recommends changing scripts
# through Makefile targets rather than through configure, and
# cites its own automate and autoheader as examples.
#CS_LD = $(CXX)
CSCPPFLAGS = $(PLE_CPPFLAGS_TMP) $(CGNS_CPPFLAGS) $(MED_CPPFLAGS) \
$(HDF5_CPPFLAGS) $(MPI_CPPFLAGS) $(LIBXML2_CPPFLAGS) $(BLAS_CPPFLAGS)

CSCFLAGS = $(CFLAGS) $(CFLAGS_DBG) $(CFLAGS_OPT)
CSCXXFLAGS = $(CXXFLAGS) $(CXXFLAGS_DBG) $(CXXFLAGS_OPT)
CSFCFLAGS = $(FCFLAGS) $(FCFLAGS_DBG) $(FCFLAGS_OPT)
CSLDFLAGS = $(PLE_LDFLAGS) $(CGNS_LDFLAGS) $(MED_LDFLAGS) \
$(HDF5_LDFLAGS) $(MPI_LDFLAGS) $(LIBXML2_LDFLAGS) $(BLAS_LDFLAGS)

CSLIBS = $(PLE_LIBS) $(CGNS_LIBS) $(MED_LIBS) \
$(HDF5_LIBS) $(MPI_LIBS) $(LIBXML2_LIBS) $(BLAS_LIBS)

edit_python = sed \
	-e 's|@PYTHON[@]|$(PYTHON)|g' \
	-e 's|@pkgpythondir[@]|$(pkgpythondir)|g'

edit_config = sed \
	-e 's|@prefix[@]|$(prefix)|g' \
	-e 's|@exec_prefix[@]|$(exec_prefix)|g' \
	-e 's|@bindir[@]|$(bindir)|g' \
	-e 's|@includedir[@]|$(includedir)|g' \
	-e 's|@pkgincludedir[@]|$(pkgincludedir)|g' \
	-e 's|@libdir[@]|$(libdir)|g' \
	-e 's|@libexecdir[@]|$(libexecdir)|g' \
	-e 's|@pkglibexecdir[@]|$(pkglibexecdir)|g' \
	-e 's|@pythondir[@]|$(pythondir)|g' \
	-e 's|@pkgpythondir[@]|$(pkgpythondir)|g' \
	-e 's|@datarootdir[@]|$(datarootdir)|g' \
	-e 's|@datadir[@]|$(datadir)|g' \
	-e 's|@pkgdatadir[@]|$(pkgdatadir)|g' \
	-e 's|@docdir[@]|$(docdir)|g' \
	-e 's|@pdfdir[@]|$(pdfdir)|g' \
	-e 's|@sysconfdir[@]|$(sysconfdir)|g' \
	-e 's|@syrthes_prefix[@]|$(syrthes_prefix)|g' \
	-e 's|@mpi_type[@]|$(mpi_type)|g' \
	-e 's|@mpi_bindir[@]|$(mpi_bindir)|g' \
	-e 's|@mpi_libdir[@]|$(mpi_libdir)|g' \
	-e 's|@cs_env_modules[@]|$(cs_env_modules)|g' \
	-e 's|@CC[@]|$(CC)|g' \
	-e 's|@CS_LD[@]|$(CS_LD)|g' \
	-e 's|@CXX[@]|$(CXX)|g' \
	-e 's|@FC[@]|$(FC)|g' \
	-e 's|@CS_CPPFLAGS[@]|$(CSCPPFLAGS)|g' \
	-e 's|@CS_CFLAGS[@]|$(CSCFLAGS)|g' \
	-e 's|@CS_CXXFLAGS[@]|$(CSCXXFLAGS)|g' \
	-e 's|@CS_FCFLAGS[@]|$(CSFCFLAGS)|g' \
	-e 's|@CS_LDFLAGS[@]|$(CSLDFLAGS)|g' \
	-e 's|@CS_LIBS[@]|$(CSLIBS)|g' \
	-e 's|@PLE_CPPFLAGS[@]|$(PLE_CPPFLAGS_TMP)|g' \
	-e 's|@PLE_LDFLAGS[@]|$(PLE_LDFLAGS)|g' \
	-e 's|@PLE_LIBS[@]|$(PLE_LIBS)|g' \
	-e 's|@LDFLAGS[@]|$(LDFLAGS)|g' \
	-e 's|@LIBINTL[@]|$(LIBINTL)|g' \
	-e 's|@LIBS[@]|$(LIBS)|g' \
	-e 's|@FCLIBS[@]|$(FCLIBS)|g' \
	-e 's|@FCMODINCLUDE[@]|$(FCMODINCLUDE)|g' \
	-e 's|@LDRPATH[@]|$(LDRPATH)|g' \
	-e 's|@MODULECMD[@]|$(MODULECMD)|g' \
	-e 's|@PYTHON[@]|$(PYTHON)|g' \
	-e 's|@PYUIC4[@]|$(PYUIC4)|g' \
	-e 's|@PYRCC4[@]|$(PYRCC4)|g' \
	-e 's|@USE_NLS[@]|$(USE_NLS)|g' \
	-e 's|@PACKAGE_NAME[@]|$(PACKAGE_NAME)|g' \
	-e 's|@PACKAGE_TARNAME[@]|$(PACKAGE_TARNAME)|g' \
	-e 's|@PACKAGE_VERSION[@]|$(PACKAGE_VERSION)|g' \
	-e 's|@PACKAGE_STRING[@]|$(PACKAGE_STRING)|g' \
	-e 's|@PACKAGE_BUGREPORT[@]|$(PACKAGE_BUGREPORT)|g' \
	-e 's|@PACKAGE_URL[@]|$(PACKAGE_URL)|g' \
	-e 's|@SALOME_KERNEL[@]|$(SALOME_KERNEL)|g' \
	-e 's|@SALOME_GUI[@]|$(SALOME_GUI)|g' \
	-e 's|@SALOME_YACS[@]|$(SALOME_YACS)|g' \
	-e 's|@SALOMEENVCMD[@]|$(SALOMEENVCMD)|g' \
	-e 's|@SALOMEPRE[@]|$(SALOMEPRE)|g' \
	-e 's|@SALOMERUN[@]|$(SALOMERUN)|g'

CLEANFILES = $(edit_scripts)

# Install binary scripts
nodist_bin_SCRIPTS = \
bin/code_saturne


# Install Python library
nodist_pkgpython_PYTHON = \
bin/cs_config.py \
bin/cs_package.py

dist_pkgpython_PYTHON = \
bin/__init__.py \
bin/cs_autovnv.py \
bin/cs_case.py \
bin/cs_case_domain.py \
bin/cs_case_coupling.py \
bin/cs_compile.py \
bin/cs_create.py \
bin/cs_exec_environment.py \
bin/cs_gui.py \
bin/cs_info.py \
bin/cs_run.py \
bin/cs_salome.py \
bin/cs_script.py \
bin/cs_xml_reader.py

autovnvdir = $(pkgpythondir)/autovnv
autovnv_PYTHON = \
bin/autovnv/Command.py \
bin/autovnv/Drawing.py \
bin/autovnv/__init__.py \
bin/autovnv/Parser.py \
bin/autovnv/Study.py \
bin/autovnv/TexMaker.py


# Install user scripts
nodist_pkgdata_DATA = \
bin/runcase_aster \
bin/runcase_coupling \
bin/SaturneGUI

dist_pkgdata_DATA = \
bin/cs_user_scripts.py

dist_pkgdata_SCRIPTS = \
bin/runcase_mpi_rank \
bin/runcase_syrthes


# Install thermochemistry and other data files
nobase_dist_pkgdata_DATA = \
data/thch/dp_C3P \
data/thch/dp_C3PSJ \
data/thch/dp_C4P \
data/thch/dp_ELE \
data/thch/dp_FCP \
data/thch/dp_FCP_new \
data/thch/dp_FUE \
data/thch/dp_FUE_new \
data/thch/dp_transfo \
data/thch/JANAF \
data/thch/meteo


# Install batch cards for cluster management
batchdir = ${pkgdatadir}/batch
batch_DATA = \
extras/batch/batch.CCC \
extras/batch/batch.LOADL \
extras/batch/batch.LOADL_BG \
extras/batch/batch.LSF \
extras/batch/batch.PBS \
extras/batch/batch.SGE \
extras/batch/batch.SLURM


# Install man pages
dist_man_MANS = \
doc/manpages/code_saturne.1


# Install bash completion script
bashcompletiondir = ${sysconfdir}/bash_completion.d
bashcompletion_DATA = \
extras/bash_completion/code_saturne


# Install global option file
sysconf_DATA = \
extras/code_saturne.cfg


# Install SALOME related files
salomedir = ${pkgdatadir}/salome
salome_DATA = \
extras/salome/fsi_yacs_scheme.xml

nodist_salome_DATA = \
extras/salome/fsi_appli_config.xml \
extras/salome/fsi.export

all: cs_config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: # $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

cs_config.h: stamp-h1
	@if test ! -f $@; then rm -f stamp-h1; else :; fi
	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi

stamp-h1: $(srcdir)/cs_config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status cs_config.h
$(srcdir)/cs_config.h.in: # $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f cs_config.h stamp-h1
doc/style/csvers.tex: $(top_builddir)/config.status $(top_srcdir)/doc/style/csvers.tex.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
extras/salome/fsi_appli_config.xml: $(top_builddir)/config.status $(top_srcdir)/extras/salome/fsi_appli_config.xml.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
bin/cs_config.py: $(top_builddir)/config.status $(top_srcdir)/bin/cs_config.py.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
bin/SaturneGUI: $(top_builddir)/config.status $(top_srcdir)/bin/SaturneGUI.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-dist_pkgdataSCRIPTS: $(dist_pkgdata_SCRIPTS)
	@$(NORMAL_INSTALL)
	test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
	@list='$(dist_pkgdata_SCRIPTS)'; test -n "$(pkgdatadir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pkgdatadir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pkgdatadir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-dist_pkgdataSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_pkgdata_SCRIPTS)'; test -n "$(pkgdatadir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
install-nodist_binSCRIPTS: $(nodist_bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
	@list='$(nodist_bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-nodist_binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt
install-autovnvPYTHON: $(autovnv_PYTHON)
	@$(NORMAL_INSTALL)
	test -z "$(autovnvdir)" || $(MKDIR_P) "$(DESTDIR)$(autovnvdir)"
	@list='$(autovnv_PYTHON)'; dlist=; list2=; test -n "$(autovnvdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
	  if test -f $$b$$p; then \
	    $(am__strip_dir) \
	    dlist="$$dlist $$f"; \
	    list2="$$list2 $$b$$p"; \
	  else :; fi; \
	done; \
	for file in $$list2; do echo $$file; done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autovnvdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(autovnvdir)" || exit $$?; \
	done || exit $$?; \
	if test -n "$$dlist"; then \
	  $(am__py_compile) --destdir "$(DESTDIR)" \
	                    --basedir "$(autovnvdir)" $$dlist; \
	else :; fi

uninstall-autovnvPYTHON:
	@$(NORMAL_UNINSTALL)
	@list='$(autovnv_PYTHON)'; test -n "$(autovnvdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	dir='$(DESTDIR)$(autovnvdir)'; \
	filesc=`echo "$$files" | sed 's|$$|c|'`; \
	fileso=`echo "$$files" | sed 's|$$|o|'`; \
	st=0; \
	for files in "$$files" "$$filesc" "$$fileso"; do \
	  $(am__uninstall_files_from_dir) || st=$$?; \
	done; \
	exit $$st
install-dist_pkgpythonPYTHON: $(dist_pkgpython_PYTHON)
	@$(NORMAL_INSTALL)
	test -z "$(pkgpythondir)" || $(MKDIR_P) "$(DESTDIR)$(pkgpythondir)"
	@list='$(dist_pkgpython_PYTHON)'; dlist=; list2=; test -n "$(pkgpythondir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
	  if test -f $$b$$p; then \
	    $(am__strip_dir) \
	    dlist="$$dlist $$f"; \
	    list2="$$list2 $$b$$p"; \
	  else :; fi; \
	done; \
	for file in $$list2; do echo $$file; done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgpythondir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgpythondir)" || exit $$?; \
	done || exit $$?; \
	if test -n "$$dlist"; then \
	  $(am__py_compile) --destdir "$(DESTDIR)" \
	                    --basedir "$(pkgpythondir)" $$dlist; \
	else :; fi

uninstall-dist_pkgpythonPYTHON:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_pkgpython_PYTHON)'; test -n "$(pkgpythondir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	dir='$(DESTDIR)$(pkgpythondir)'; \
	filesc=`echo "$$files" | sed 's|$$|c|'`; \
	fileso=`echo "$$files" | sed 's|$$|o|'`; \
	st=0; \
	for files in "$$files" "$$filesc" "$$fileso"; do \
	  $(am__uninstall_files_from_dir) || st=$$?; \
	done; \
	exit $$st
install-nodist_pkgpythonPYTHON: $(nodist_pkgpython_PYTHON)
	@$(NORMAL_INSTALL)
	test -z "$(pkgpythondir)" || $(MKDIR_P) "$(DESTDIR)$(pkgpythondir)"
	@list='$(nodist_pkgpython_PYTHON)'; dlist=; list2=; test -n "$(pkgpythondir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
	  if test -f $$b$$p; then \
	    $(am__strip_dir) \
	    dlist="$$dlist $$f"; \
	    list2="$$list2 $$b$$p"; \
	  else :; fi; \
	done; \
	for file in $$list2; do echo $$file; done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgpythondir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgpythondir)" || exit $$?; \
	done || exit $$?; \
	if test -n "$$dlist"; then \
	  $(am__py_compile) --destdir "$(DESTDIR)" \
	                    --basedir "$(pkgpythondir)" $$dlist; \
	else :; fi

uninstall-nodist_pkgpythonPYTHON:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_pkgpython_PYTHON)'; test -n "$(pkgpythondir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	dir='$(DESTDIR)$(pkgpythondir)'; \
	filesc=`echo "$$files" | sed 's|$$|c|'`; \
	fileso=`echo "$$files" | sed 's|$$|o|'`; \
	st=0; \
	for files in "$$files" "$$filesc" "$$fileso"; do \
	  $(am__uninstall_files_from_dir) || st=$$?; \
	done; \
	exit $$st
install-man1: $(dist_man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list=''; test -n "$(man1dir)" || exit 0; \
	{ for i in $$list; do echo "$$i"; done; \
	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-bashcompletionDATA: $(bashcompletion_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(bashcompletiondir)" || $(MKDIR_P) "$(DESTDIR)$(bashcompletiondir)"
	@list='$(bashcompletion_DATA)'; test -n "$(bashcompletiondir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(bashcompletiondir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(bashcompletiondir)" || exit $$?; \
	done

uninstall-bashcompletionDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(bashcompletion_DATA)'; test -n "$(bashcompletiondir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(bashcompletiondir)'; $(am__uninstall_files_from_dir)
install-batchDATA: $(batch_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(batchdir)" || $(MKDIR_P) "$(DESTDIR)$(batchdir)"
	@list='$(batch_DATA)'; test -n "$(batchdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(batchdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(batchdir)" || exit $$?; \
	done

uninstall-batchDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(batch_DATA)'; test -n "$(batchdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(batchdir)'; $(am__uninstall_files_from_dir)
install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
	done

uninstall-dist_pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
install-nobase_dist_pkgdataDATA: $(nobase_dist_pkgdata_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
	@list='$(nobase_dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	$(am__nobase_list) | while read dir files; do \
	  xfiles=; for file in $$files; do \
	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
	  test -z "$$xfiles" || { \
	    test "x$$dir" = x. || { \
	      echo "$(MKDIR_P) '$(DESTDIR)$(pkgdatadir)/$$dir'"; \
	      $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)/$$dir"; }; \
	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(pkgdatadir)/$$dir'"; \
	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(pkgdatadir)/$$dir" || exit $$?; }; \
	done

uninstall-nobase_dist_pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nobase_dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
install-nodist_pkgdataDATA: $(nodist_pkgdata_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
	@list='$(nodist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
	done

uninstall-nodist_pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
install-nodist_salomeDATA: $(nodist_salome_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(salomedir)" || $(MKDIR_P) "$(DESTDIR)$(salomedir)"
	@list='$(nodist_salome_DATA)'; test -n "$(salomedir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(salomedir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(salomedir)" || exit $$?; \
	done

uninstall-nodist_salomeDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_salome_DATA)'; test -n "$(salomedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(salomedir)'; $(am__uninstall_files_from_dir)
install-salomeDATA: $(salome_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(salomedir)" || $(MKDIR_P) "$(DESTDIR)$(salomedir)"
	@list='$(salome_DATA)'; test -n "$(salomedir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(salomedir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(salomedir)" || exit $$?; \
	done

uninstall-salomeDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(salome_DATA)'; test -n "$(salomedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(salomedir)'; $(am__uninstall_files_from_dir)
install-sysconfDATA: $(sysconf_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(sysconfdir)" || $(MKDIR_P) "$(DESTDIR)$(sysconfdir)"
	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sysconfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(sysconfdir)" || exit $$?; \
	done

uninstall-sysconfDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(sysconfdir)'; $(am__uninstall_files_from_dir)
install-nodist_pkgincludeHEADERS: $(nodist_pkginclude_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)"
	@list='$(nodist_pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \
	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \
	done

uninstall-nodist_pkgincludeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) cs_config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) cs_config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) cs_config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS) cs_config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-lzma: distdir
	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
	$(am__remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lzma*) \
	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(SCRIPTS) $(MANS) $(DATA) $(HEADERS) cs_config.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(autovnvdir)" "$(DESTDIR)$(pkgpythondir)" "$(DESTDIR)$(pkgpythondir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(bashcompletiondir)" "$(DESTDIR)$(batchdir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(salomedir)" "$(DESTDIR)$(salomedir)" "$(DESTDIR)$(sysconfdir)" "$(DESTDIR)$(pkgincludedir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-autovnvPYTHON install-bashcompletionDATA \
	install-batchDATA install-dist_pkgdataDATA \
	install-dist_pkgdataSCRIPTS install-dist_pkgpythonPYTHON \
	install-man install-nobase_dist_pkgdataDATA \
	install-nodist_pkgdataDATA install-nodist_pkgincludeHEADERS \
	install-nodist_pkgpythonPYTHON install-nodist_salomeDATA \
	install-salomeDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-nodist_binSCRIPTS install-sysconfDATA

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man: install-man1

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-autovnvPYTHON uninstall-bashcompletionDATA \
	uninstall-batchDATA uninstall-dist_pkgdataDATA \
	uninstall-dist_pkgdataSCRIPTS uninstall-dist_pkgpythonPYTHON \
	uninstall-man uninstall-nobase_dist_pkgdataDATA \
	uninstall-nodist_binSCRIPTS uninstall-nodist_pkgdataDATA \
	uninstall-nodist_pkgincludeHEADERS \
	uninstall-nodist_pkgpythonPYTHON uninstall-nodist_salomeDATA \
	uninstall-salomeDATA uninstall-sysconfDATA

uninstall-man: uninstall-man1

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
	ctags-recursive install-am install-data-am install-strip \
	tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am am--refresh check check-am clean clean-generic \
	clean-libtool clean-local ctags ctags-recursive dist dist-all \
	dist-bzip2 dist-gzip dist-hook dist-lzma dist-shar dist-tarZ \
	dist-xz dist-zip distcheck distclean distclean-generic \
	distclean-hdr distclean-libtool distclean-tags distcleancheck \
	distdir distuninstallcheck dvi dvi-am html html-am info \
	info-am install install-am install-autovnvPYTHON \
	install-bashcompletionDATA install-batchDATA install-data \
	install-data-am install-data-hook install-dist_pkgdataDATA \
	install-dist_pkgdataSCRIPTS install-dist_pkgpythonPYTHON \
	install-dvi install-dvi-am install-exec install-exec-am \
	install-html install-html-am install-info install-info-am \
	install-man install-man1 install-nobase_dist_pkgdataDATA \
	install-nodist_binSCRIPTS install-nodist_pkgdataDATA \
	install-nodist_pkgincludeHEADERS \
	install-nodist_pkgpythonPYTHON install-nodist_salomeDATA \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-salomeDATA install-strip install-sysconfDATA \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am \
	uninstall-autovnvPYTHON uninstall-bashcompletionDATA \
	uninstall-batchDATA uninstall-dist_pkgdataDATA \
	uninstall-dist_pkgdataSCRIPTS uninstall-dist_pkgpythonPYTHON \
	uninstall-man uninstall-man1 uninstall-nobase_dist_pkgdataDATA \
	uninstall-nodist_binSCRIPTS uninstall-nodist_pkgdataDATA \
	uninstall-nodist_pkgincludeHEADERS \
	uninstall-nodist_pkgpythonPYTHON uninstall-nodist_salomeDATA \
	uninstall-salomeDATA uninstall-sysconfDATA


bin/code_saturne bin/runcase_coupling: Makefile
	rm -f $@ $@.tmp
	srcdir=''; \
	test -f ./$@.in || srcdir=$(srcdir)/; \
	$(edit_python) $${srcdir}$@.in >$@.tmp
	mv $@.tmp $@

bin/cs_package.py bin/runcase_aster: Makefile
	rm -f $@ $@.tmp
	srcdir=''; \
	test -f ./$@.in || srcdir=$(srcdir)/; \
	$(edit_config) $${srcdir}$@.in >$@.tmp
	mv $@.tmp $@

bin/code_saturne: $(srcdir)/bin/code_saturne.in 
bin/cs_package.py: $(srcdir)/bin/cs_package.py.in 
bin/runcase_aster: $(srcdir)/bin/runcase_aster.in 
bin/runcase_coupling: $(srcdir)/bin/runcase_coupling.in 

# Finish user files installation
# - tag with the package version number
# - remove the test preventing from using a source file
# Done with two sed passes (do not work otherwise)

install-data-hook:
	cd $(DESTDIR)$(pkgdatadir)/users && \
	f90_user_files=`ls */*.f90 2>/dev/null`; \
	stubvers="^\!VERS\n"; \
	version1="\!                      Code_Saturne version $(VERSION)\n"; \
	version2="\!                      --------------------------"; \
	comment1="^\! TEST_TO_REMOVE_FOR_USE_OF_SUBROUTINE_START"; \
	comment2="^\! TEST_TO_REMOVE_FOR_USE_OF_SUBROUTINE_END"; \
	for file in $${f90_user_files}; do \
	  $(SED) -e "N;s/$${stubvers}/$${version1}$${version2}/" < "$${file}" | \
	  $(SED) -e "/$${comment1}/,/$${comment2}/d" > "$${file}.tmp" && \
	  mv "$${file}.tmp" "$${file}"; \
	done ;\
	c_user_files=`ls */*.c 2>/dev/null`; \
	stubvers="\/\* VERS \*\/"; \
	version="\/\* Code_Saturne version $(VERSION) \*\/"; \
	comment="\/\* REMOVE_LINE_FOR_USE_OF_SUBROUTINE \*\/"; \
	for file in $${c_user_files}; do \
	  $(SED) -e "N;s/$${stubvers}/$${version}/" < "$${file}" | \
	  $(SED) -e "/$${comment}/d" > "$${file}.tmp" && \
	  mv "$${file}.tmp" "$${file}"; \
	done

dist-hook:
	-rm -rf `find $(distdir)/examples  -name .svn`
	-rm -rf `find $(distdir)/extras  -name .svn`
	-rm -rf `find $(distdir)/patches -name .svn`
	-rm -f $(distdir)/extras/salome/fsi_appli_config.xml

clean-local:
	-rm -f *__genmod.f90 *__genmod.mod

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
